cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1446
Views
0
Helpful
3
Replies

CIMC or IPMI for OS installation

asteroid4u
Level 1
Level 1

Hi Team,

Is it possible to Install OS remotely using IPMI or CIMC with ssh and without using browser or console. I have to mount ISO in ssh connection itself.

3 Replies 3

Kirk J
Cisco Employee
Cisco Employee

Greetings.

Please see http://www.cisco.com/c/en/us/support/servers-unified-computing/ucs-c-series-integrated-management-controller/products-installation-and-configuration-guides-list.html and pick the version that matches your CIMC firmware level.  

You can mount a remote ISO image via NFS or cifs, see http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/cli/config/guide/3_0/b_Cisco_UCS_C-Series_CLI_Configuration_Guide_301/b_Cisco_UCS_C-Series_CLI_Configuration_Guide_201_chapter_0110.html#task_41F0450884D0458EAC81D05AC311CC92

You can also manage boot order, and power on/off server, see http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/cli/config/guide/3_0/b_Cisco_UCS_C-Series_CLI_Configuration_Guide_301/b_Cisco_UCS_C-Series_CLI_Configuration_Guide_201_chapter_011.html 

You can do quite a bit of stuff with IPMI as well, which would require setting up a IPMI user and password, but would probably avoid that unless you can't do something via a SSH session with the CIMC.

Thanks,

Kirk...

Hi Kirk,

I cannot use nfs/cifs. could it able to mount iso image in command line?

By the way we are using B series 

Your SSH session would be with the UCSM management.

You have to create virtual media policies that use a supported protocol, or use the vKVM GUI to map an ISO (the vKVM mapping of ISO is a GUI only function).

Your virtual media install options are:

    • Virtual media via vKVM GUI
    • vMedia Policy with supported protocol
      • NFS
      • CIFS
      • HTTP
      • HTTPS

You may be able to use the KVM dongle and connect a 'bootable' USB thumbdrive with your install ISOs, but that would require physically touching each blade to connect the bootable USB media via KVM dongle cable.

It sounds like your local network restrictions are not meeting the minimum requirements for deploying the UCSM.

Thanks,

Kirk...

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: