CISCO C210-M2 raid with 1064e

[riversidechurch]

Using the above setup can i use 4 disks, striping them togther in sets of two and then using one to mirror the orther. So I have Raid 0 and 1. I have only 2 disks at the moment but I will buy two more if I can do it.

Basicly I want the fasted mirrored raid I can on this machine.

Thanks

Jim Bray

[padramas]

Hello Jim,

LSI 1064E controller does not support RAID 10 configuration.

http://www.cisco.com/en/US/partner/docs/unified_computing/ucs/c/hw/C210M1/install/RAID.html#wp1015386

HTH

Padma

[Zaira Vega]

LSI 1064E also support RAID 1E, which does mirroring and striping. However, you need at least 3 hard drives. It tolerates a single drive failure.

Otherwise, you can implement RAID 1 for redundancy in case of failure.