09-27-2016 01:13 AM
Please help,
I am running Nexus 5548 as a vpc peers and their configuration are the same, however on of the nexus 5k is running 60-70% of CPU and the snmpd is consistently above 40%, can anybody help please.
Hardware
cisco Nexus5548 Chassis
Software
BIOS: version 3.5.0
loader: version N/A
kickstart: version 5.0(3)N2(1)
system: version 5.0(3)N2(1)
Nexus-5K-B# sh processes cpu sort
PID Runtime(ms) Invoked uSecs 1Sec Process
----- ----------- -------- ----- ------ -----------
4596 80 559614080 0 43.0% snmpd
4622 180 86 2098 9.0% netstack
1 1854 15594452 0 0.0% init
NL-DC-5K-39B# sh proc cpu histo
595655555565555578555555555555566656555555555555559555567555
867368678798799811786986599987901960697989967667775877600876
100 # #
90 # #
80 # # #
70 # # ## # # #
60 ############################################################
50 ############################################################
40 ############################################################
30 ############################################################
20 ############################################################
10 ############################################################
0....5....1....1....2....2....3....3....4....4....5....5....
0 5 0 5 0 5 0 5 0 5
CPU% per second (last 60 seconds)
# = average CPU%
1 1 1 1 1 1
997089889899880878978788808878778788088888888890898999998909
869011665931590779138644100361880912035544567860918455765709
100 ** * * * * * ** **** ***
90 ** * *********** ** * * * ** ******************
80 ***#**********#**** *****#**********#**********#**********#*
70 ***#**********#**********#**********#**********#**********#*
60 ############################################################
50 ############################################################
40 ############################################################
30 ############################################################
20 ############################################################
10 ############################################################
0....5....1....1....2....2....3....3....4....4....5....5....
0 5 0 5 0 5 0 5 0 5
CPU% per minute (last 60 minutes)
* = maximum CPU% # = average CPU%
778777777777777777777777777777777777777777777777777777777777777777777777
760778787777778777777777877777667878787777877878687777677777777777777677
100
90
80 ************************************************************************
70 ************************************************************************
60 ########################################################################
50 ########################################################################
40 ########################################################################
30 ########################################################################
20 ########################################################################
10 ########################################################################
0....5....1....1....2....2....3....3....4....4....5....5....6....6....7.
0 5 0 5 0 5 0 5 0 5 0 5 0
CPU% per hour (last 72 hours)
* = maximum CPU% # = average CPU%
Solved! Go to Solution.
09-27-2016 02:12 AM
hi
looks like there are problems with that version and snmp , have you tried restarting the 5k does it constantly creep back up to high levels for that process ?
you could try the below as temp fix on switch that's effected in the support forum link , it should restart the snmpd process , may fix it
https://supportforums.cisco.com/discussion/11363941/snmp-nexus-5548-failing
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCtr65682
couple of good tshoot commands specific for snmp as well in this doc for 5ks
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/troubleshooting/guide/N5K_Troubleshooting_Guide/n5K_ts_sm.html#pgfId-1024645
09-27-2016 02:12 AM
hi
looks like there are problems with that version and snmp , have you tried restarting the 5k does it constantly creep back up to high levels for that process ?
you could try the below as temp fix on switch that's effected in the support forum link , it should restart the snmpd process , may fix it
https://supportforums.cisco.com/discussion/11363941/snmp-nexus-5548-failing
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCtr65682
couple of good tshoot commands specific for snmp as well in this doc for 5ks
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/troubleshooting/guide/N5K_Troubleshooting_Guide/n5K_ts_sm.html#pgfId-1024645
09-27-2016 08:39 AM
Thanks Mark,
I will try the temp fixes and feedback to you.
Thank you for the advise.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide