Server Networking

UCS C200 M2 with ESXi 5.1.0-799733 Image downloaded from MyVMware: ESXi-5.1.0-799733-custom-Cisco-2.1.0.3 ISO mount program: Rufus 2.1.1 vSphere Cliente 5.1.

Hi Guys, Please i would like to have your input whether is it possible to have a VPC between the VDC's which are running on two physical boxes. I know that we can configure 8 VDC's per box and assuming two boxes each divided into 2 VDC's. The requir...

We have ordered new sup 2e's as well as F3 cards. Our current configuration contains M1 and F1 cards, I know that the existing is compatible with the new sups but are are all 3 line cards compatible?  We would like to be able to migrate to the F3's i...

Hi everybody, if got a short question how you doing the switch-profile configuration with Nexus with switches. The situation is easy, two Nexus 5672 connected via peer-link and a bunch dual-homed FEX's. So what you're doing first? Import the whole c...

We have few C220 and C240 servers.As per the cisco Field notice decided to change the LSI Megaraid controllers. One of the server we changed successfully but another server after changing the raid card we lost our application running on that server. ...

I was looking to find out if the N5K-C5596UP-SUP would support the MP-BGP EVPN  VXLAN routing (control or data plane )  feature? AFAIK the online documentation does not seem to include the nexus 5900 in the mix for this feature. Any pointers would be...

Hi All what is fabric path and difference between VPC and Fabric path. r

Hi, One quick question. Is the Cisco UCS vic 1227 a single point of failure. I ask because we have just updated our Cisco server to 3.1.2b, and it failed badly. It looks like the MLOM update has failed, and now we cannot make it to work again, so th...

Hi, we are using two cisco VM for CUCM,Jabber VC:- 1. UCS C240 M4. 2.BE7000M UCS C240 M4S2  What is the difference between these two servers specification or comparison. is both are same ? Regards, Ravi

Hi I am configuring a VXLAN for the first time on a production environment. I have 2 Nexus 9372 switches at each site. At each site they are in a VPC pair. These switches will be the VTEPs Multicast is not enabled on the underlying network but it w...

Hi, I'm currently working on a little project to try and save IP addresses. I've created a Private VLAN with a secondary isolated VLAN, such that I can add multiple different hosts without wasting multiple addresses on the network address and broadca...

Hi, I have four Nexus 5548UP, two in a redundant FEX setup which then connect to the other two which also have redundant FEX's. These pairs are in separate vPC Clusters. Both Nexus are slow to respond to pings and SSH is very slow on them. Performanc...