10-10-2014 08:34 AM
Hello Team,
I need to update a FI Cisco UCS 6248UP and and I wonder if you have any recommendation. someone already did it?
Thank you very much!
MRF
Solved! Go to Solution.
10-11-2014 11:03 PM
Hi MRF
I would at least upgrade the infrastructure (UCSM, FI and IOM) to 2.2.
The Server could then be at 2.1 or 2.2
and check with the interop utilitly, if your OS is still supported
http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html
Good luck
Walter.
10-10-2014 10:12 AM
It's not only FI, but UCS manager, IOM and servers.
This process is documented in detail, see eg.
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/firmware-mgmt/gui/2-2/b_GUI_Firmware_Management_22/b_GUI_Firmware_Management_22_chapter_0100.html
What is the current version that you use ?
10-10-2014 02:09 PM
ello Wday
Thank you for your response.
The current version is 2.03a and i need update FW Cisco UCS because it is a NetApp FlexPod Solution.
We will update the NetApp DATA Ontap from version 8.1.1 to 8.2 and the NetApp IMT (Interoperability Matrix Tool) request the minimum version FI 2.05a.
We will intend to do the update Cisco FI to version 2.1 or 2.2 version.
Thank you for your help.
MRF
from Brazil
10-11-2014 11:03 PM
Hi MRF
I would at least upgrade the infrastructure (UCSM, FI and IOM) to 2.2.
The Server could then be at 2.1 or 2.2
and check with the interop utilitly, if your OS is still supported
http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html
Good luck
Walter.
10-13-2014 05:56 AM
Thank you Walter for your help.
Best,
MRF
from Brazil
10-13-2014 08:22 AM
Hi Mario
I just realized, that there was a recent webex session covering UCS firmware updates
https://supportforums.cisco.com/discussion/12302271/ask-expert-cisco-unified-computing-system-ucs-b-series-upgrade-troubleshooting
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide