Hello All,
We have Cisco nexus 3048 device, the startup config shows the below output
Nexus-3k# show startup-config
No startup configuration
Nexus-3k#
But for "sh running-config" command i got the proper output, so when i try to copy the running config to startup config i am getting the below error.
Nexus-3k# copy running-config startup-config
[########################################] 100%
Configuration update aborted: request was aborted
NX-OS version used is nxos.7.0.3.I7.1.bin , also getting the below logs repeatedly.
%SYSMGR-2-CORE_SAVE_FAILED: zip_copy_file_to_logflash: PID 27190 with message Failed to
copy /var/sysmgr/tmp/0x101_xmlsa_core.26040.gz to logflash. Error file error (srcerr 0x0 dsterr 0x807b001e) .
%PLATFORM-2-MEMORY_ALERT_RECOVERED: Memory Status Alert : CRITICAL ALERT RECOVERED
%SYSMGR-2-NON_VOLATILE_DB_INODE_FULL: System non-volatile inode storage usage is unexpe
ctedly high at 100%.
Could someone provide me the solution to copy the running config to startup config, also to stop the above errors.
Thank you.
