Enabling NPV on 5596UP

[dynamoxxx]

I  know enabling NPV on MDS switches erases FC configuration. I need  to  enable NPV on Nexus 5596UP and i just want to make sure when it  says  that enabling NPV will ease current running config that only applies to FC portion of the switch, it will not erase the Ethernet config.

Thank you

[Jerry Ye · Accepted solution]

When you convert the switch to NPV mode, the full config is erased and required a reload.

HTH,

jerry

[dynamoxxx]

Ouch ...it is what it is i guess. Thanks Jerry