cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
406
Views
0
Helpful
1
Replies

How many HSRP members dose nexus3048 support?

zhchen0106
Level 1
Level 1

Hi,all:

I  set HSRP on three nexus 3048 : S1--S2--S3

S1:

interface Vlan12
  no shutdown
  ip address 1.1.1.252/24
  hsrp 12
    preempt
    priority 150
    ip 1.1.1.254

S2:

interface Vlan12
  no shutdown
  ip address 1.1.1.253/24
  hsrp 12
    preempt
    priority 120
    ip 1.1.1.254

S3:

interface Vlan12
  no shutdown
  ip address 1.1.1.251/24
  hsrp 12
    ip 1.1.1.254

 

The pc which connected on SW3,set gateway ip 1.1.1.254,can't ping other network(can ping the gateway).

If I set gateway ip 1.1.1.252(S1 physics IP),then ping  the other network well.

 

The other pc connected on SW1&SW2 works well.

 

Does nexus not support three or more members in HSRP?

 

NX-OS version:6.0(2)U1(2)

 

I repalced with N3048 and 3560X,the problem not appear in 3560X (architecture is the same)

1 Reply 1

zhchen0106
Level 1
Level 1

I found N5K has a similar BUG:

Symptom:
HSRP not working

Conditions:
If HSRP group in one vlan has more than 2 nexus 5000s, or if the vpc pair is not in one of the supported states below.

active-standby
listen-listen

Workaround:

None. This bug is to get the documentation updated.

Review Cisco Networking for a $25 gift card