Hello Experts,The installation goes through fine, the boot order in the service profile is correct. The server just goes blank and shows a white cursor and gets stuck in this screen for a long time.What might be the problem ? Shakeeb
Hi There,I am new to nexus world, mainly telecom side. I have a situation where a vendor like to deploy two Cisco UCS-C series servers for voice deployment.Each UCS C240 M3 server has 4 NICs, 2 nics bonded 802.1q will connect to primary nexus 5k swit...
We have a vsm that is using the advanced license, we aren't using any of these features and don't have intention of doing any in the future. We have a shortage of license on this now and would like to change to essential. Can this be done on the fl...
We are new to the Nexus line. 2 servers were installed on the Cisco Nexus 5548 with 10 gig NICs. The server group is saying that some database copies are taking just as long as they were on 1 gig cards but some of the SQL database copies were up to 4...
Hi，all：I set HSRP on three nexus 3048 : S1--S2--S3S1：interface Vlan12 no shutdown ip address 1.1.1.252/24 hsrp 12 preempt priority 150 ip 1.1.1.254S2：interface Vlan12 no shutdown ip address 1.1.1.253/24 hsrp 12 preempt priority ...
Hi,We are looking for a DC Switch that can manage FC, FCoE and 40G ports. I know that Nexus 5000 can manage FC but I'm not sure if the new Nexus 9000 manage pure FC.? Regards,Ivan
who knows Nexus 3172 support VXLAN or not?Is it need specify the version or specify license?I find Nexus 3172 is support VXLAN at CISCO Nexus 3100 compare modules,but in Nexus 3172 datasheet didn't detail and i can't find Nexus 3172 VXLAN configurati...
Hi All, Anyone can advise what kind of PCI-e Card I can use if I need a 1Gbps Fibre (SX) transceiver on the UCS C220 server?Is the GLC-SX-MMD is compatible with any 10Gbps SFP+ card? Thanks,Eka
Hi,We have a N5K with NPIV configured and and MDS9148 we're gonna setup a port channel and have come to the conclusion that we need the F-port-channel-trunk feature enabled on the MDS side.Question: Is enabling the F-port-channel-trunk feature on the...
Hello.There was an unclear problem.5548UP-CORE-1(config)# ip name-server 10.х.х.хcp: cannot create regular file `/tmp/dhcp_dcos_resolv.conf': Internal error in updating the configuration: unable to copy original dataCannot write to the dns configura...
In a 1000v when I create a port profile and apply it to the vm server in VMware I see that it creates a vethernet interface which inherits the port profile automatically. Is it possible to edit the vethernet interface in the cli to modify or change t...
Good day everyone,We are planning on upgrading line cards, and Sup modules, and I would like to know if there is best practice document or suggestion on what is the best way to migrate the current topology to new topology.This is a flat network and i...
I'm attempting to setup Adapter-FEX between a Cisco C220 M3 server with a Broadcom BCM57810 (Cisco P/N UCSC-PCIE-B3SFP) and a pair of Nexus 5596 switches. The server is running Windows 2012 R2 (also tried 2008 R2). I've setup both the Nexus switche...
2x Nexus 5548UP + 2x B22HP FEX modules single-homed connected. IOS 5.2(1)N1(6). Seems to be a cosmetic issue and is an annoyance. I'm unsure whether this is normal FEX behaviour or something specific to these B22HP cards (which is basically a FEX fo...
