Has anyone experienced issue with VLAN tagging and Hyper-V 2012. Our server Team wants 1 management Vlan and one Migration VLAN. Also, it is teamed nics on one Port channel so I create the portchannel to be a trunk and trunk the 2 vlans. I can see one vlan associated to the Vnic but it is not routing even though it has a Ip addressed assign on correct VLAN. One Ip is pinging on the other vlan. This happens without no VLAN Native. I have toyed with native VLANs. However, same thing occurs.
switchport mode trunk
switchport trunk native vlan 2
switchport trunk allowed vlan 2,207
spanning-tree port type edge trunk
207 is a vlan for migration and is a OTV vlan between 2 data centers.
Cisco Workload Optimization Manager (CWOM)
Continuously Assure Application Performance at Any Scale
Webinar: Wednesday, October 23rd at 11am ET
Today’s applications utilize traditional virtualization platforms as well as newer DevOps meth...
To participate in this event, please use the button to ask your questions
This special event - formerly known as Ask the Expert- is open only to Cisco Customers and Partners.
Many pages in the Cisco Community are acce...