We have most likely run into CSCtz74514 in 4.2(1)SP1(3) in a HA Nexus 1010 setup and need to upgrade. In the downloads I can find 4.1(1)SP1(5.1) for Nexus 1010. I have read through the release notes for 4.2(1)SP1(5.1). The only VSAs talked about are Nexus 1110-S and 1110-X
Is 4.2(1)SP1(5.1) really supported on a classic Nexus 1010 with 16GB ram or should we go for 4.2(1)SP1(4a)?
NTM-DC-VSA-01# show inventory
NAME: "Chassis", DESCR: "Nexus 1010 (Virtual Services Appliance) 2 slot Chassis "
PID: N1K-C1010 , VID: A , SN: 1610440479132074267
NAME: "Slot 1", DESCR: "Nexus 1010 (Virtual Services Appliance)"
PID: N1K-C1010 , VID: A , SN: QCI1533A662
NAME: "Slot 2", DESCR: "Nexus 1010 (Virtual Services Appliance)"
PID: N1K-C1010 , VID: A , SN: QCI1533A7Q3
NTM-DC-VSA-01# show ver
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2011, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
Software
loader: version unavailable [last: loader version not available]
kickstart: version 4.2(1)SP1(3)
system: version 4.2(1)SP1(3)
kickstart image file is: bootflash:/nexus-1010-kickstart-mz.4.2.1.SP1.3.bin
kickstart compile time: 7/8/2011 18:00:00 [07/09/2011 04:51:59]
system image file is: bootflash:/nexus-1010-mz.4.2.1.SP1.3.bin
system compile time: 7/8/2011 18:00:00 [07/09/2011 05:16:25]
Hardware
cisco Nexus 1010 (Virtual Services Appliance) 2 slot Chassis ("Nexus 1010 (Virtual Services Appliance)")
with 14304256 kB of memory.
Processor Board ID T023D701401
Device name: NTM-DC-VSA-01
bootflash: 3897832 kB
Disk Storage capacity for VM virtual disks: 346264 MB
Number of physical 1Gbps ethernet ports: 6
