cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3588
Views
0
Helpful
7
Replies

Nexus 56128P Transceiver Support

mlinder01
Level 1
Level 1

Hi All,

The documentations (datasheets, compatability matrix and release notes) are not clear so i would like to ask the community if those transceivers are supported and maybe someone use it in productive environment...

 

- GLC-SX-MM(D) on Nexus 56128P SFP+ Ports is this supported? (there is also no entry for Nexus 5600 Series in 1G Compatability Matrix)

- I'm pretty sure that SFP-10G-SR is working on Nexus 56128P SFP+ Ports but somehow it is missing in the Nexus 5600 Release Notes. It is working right?

 

Many thanks,

Manuel

 

7 Replies 7

Reza Sharifi
Hall of Fame
Hall of Fame

Hi,

Based on the information from the data sheets, these switches are only 10/40Gig and not 1Gig.

Cisco Nexus 5672UP Switch: The Cisco Nexus 5672UP (Figure 1) is a 1RU 10 and 40 Gigabit Ethernet switch offering wire-speed performance for up to seventy-two 10 Gigabit Ethernet ports (using Quad Small Form-Factor Pluggable

Link:

http://www.cisco.com/c/en/us/products/collateral/switches/nexus-5000-series-switches/datasheet-c78-730760.html

HTH

 

Hi Reza,

Thanks for the comment but on the same link just some lines lower;

"The Cisco Nexus 5672UP offers 48 fixed 1 Gigabit and 10 Gigabit Ethernet ports of which 16 ports can be unified ports (UP)"

So whats true?

Regards,

Manuel

Hi Manuel,

You are correct.  The ports support 1/10Gig not just 10Gig.  I apologize for misinforming you.

So, are you trying to use GLC-SX-MM (1gig SFPs) on the 5700 series?

Do you already have these SFPs or you are planning on purchasing them?

Thanks,

 

 

 

Hi Reza,

No Problem!

Yes, we are planing to have some 1G Transceivers on the Nexus 56128P

thanks,

manuel

Hi Manual,

Both GLC-SX-MM and GLC-LH-SM are supported on the 5600 series. You can also use GLC-LH-SMD and GLC-SX-MMD

I have used above optics on the 5500 with no issues.

see table-6 in this link:

http://www.cisco.com/c/en/us/products/collateral/switches/nexus-5000-series-switches/datasheet-c78-730760.html

HTH

Reza

Hi,

CISCO GLC-TE working on Nexus 5672UP?

I need to use SFP 1Gb connect from ISP to my nexus.


Thanks

Please check the following link, enter your switch and it will list all compatible transceiver modules:
https://tmgmatrix.cisco.com/

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: