06-03-2015 01:55 AM
Is it possible to have vPC peer link on the F3 line cards?
06-03-2015 02:52 PM
See table-1 in this link
As of 6.2, F1 and F2 only
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/interfaces/configuration/guide/b-Cisco-Nexus-7000-Series-NX-OS-Interfaces-Configuration-Guide/b-Cisco-Nexus-7000-Series-NX-OS-Interfaces-Configuration-Guide-6x_chapter_01000.html#concept_995147A21DB0416AB2910378BB58100B
HTH
06-03-2015 09:07 PM
Reza,
We can configure the peer-link on F3 card as well, Now I need to send email to the concern people to add that on the data sheet.
I have configured VPC peer-link on F3 card for one of my customer and its working fine.
Regards
Inayath.
06-03-2015 09:20 PM
Hi,
Thank you, I will also test once I get the equipment. I had seen the documentation but wanted to cross check.
06-03-2015 09:25 PM
Anyone with hands on experience on the Nexus 9000?
https://supportforums.cisco.com/discussion/12523956/vpc-peer-links-n9508-and-n9300
06-04-2015 07:04 AM
Thanks Inayath!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide