Nexus C2348UPQ with GLC-T 1000Base-T SFP

[Frank Walker]

Hi,

I have a N2K 2348UPQ as FEX attached to a N5K 5648Q.

I have installed some GLC-T SFPs to attach Servers copper interfaces. This is working fine for a server with 1 GBit interface. But I have some older servers with only 100 MBit interfaces.

When I change the port speed on the FEX to 100 I get an error:

"ERROR: Ethernet107/1/1: Configuration does not match the port capability."

Is there a possibility to set the port speed on the FEX interfaces to 100MBit?

My system image is 7.3.1.N1.1

Thanks

Frank

[Reza Sharifi]

edited

I think,GLC-T SFP are only Gig and can't go down to 100Mb.

HTH