09-18-2013 03:46 PM
On some of the older switches you can run a command like the one below to point to a server and a specific UDP/TCP port.
logging host xxx.xxx.xxx.xxx transport tcp port yyyy
Trying to do the same on the Nexus but cannot find the command to do so. using the following command now:
logging server xxx.xxx.xxx.xxx 6 use-vrf management
any suggestions?
thanks
Solved! Go to Solution.
09-19-2013 08:02 AM
There's an enhancement request currently opened for this -> CSCue48191
If this feature is important, I'd suggest you open a quick TAC case and request to have your SR linked to this bug to add priority to this request.
Regards,
Robert
09-19-2013 08:02 AM
There's an enhancement request currently opened for this -> CSCue48191
If this feature is important, I'd suggest you open a quick TAC case and request to have your SR linked to this bug to add priority to this request.
Regards,
Robert
03-24-2014 12:42 PM
How is this not a feature initially implemented?
04-15-2022 11:32 AM
8 years later and still not easy...
logging server _IP_ port 10516 use-vrf _VRF_
not sure if it's UDP/TCP or both..
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide