Hi all,
We want to do a backup of a virtual-service-blade in a Nexus 1010. The document we are following is:
http://www.cisco.com/en/US/docs/switches/datacenter/nexus1000/sw/4_2_1_s_p_1_3/software/configuration/guide/n1010_vsvcs_cfg_7backup.html
What we are supposed to do fron this document is to create a file named export-import, to shutdown the primary o secondary virtual service blades, and after it, to execute the command "export primary" o "export secondary", depending on which vsb we want to export.
========= DETAILED STEP IN THE DOCUMENT ================
n1010-1(config-vsb-config)# export secondary
Note: export started..
Note: please be patient..
Note: please be patient..
Note: please be patient..
Note: export completed...n1010-1(config-vsb-config)#
====================================================
The problem is that this "export" command is not available in our nexus 1010.
=========== NEXUS 1010 ===============================
N1010-MGMT(config-vsb-config)# export secondary
^
% Invalid command at '^' marker.
N1010-MGMT(config-vsb-config)#
N1010-MGMT(config-vsb-config)#
N1010-MGMT(config-vsb-config)# ?
description Virtual service blade description
disksize Configure disk size
enable Deploy/remove the virtual service blade
interface Configure virtual service blade interface vlan
no Negate a command or set its defaults
numcpu Configure numcpu
ramsize Configure ram size
shutdown Start/stop the virtual service blade
virtual-service-blade-type Select the virtual service blade type
end Go to exec mode
exit Exit from command interpreter
pop Pop mode from stack or restore from name
push Push current mode to stack or save it under name
where Shows the cli context you are in
=====================================================
The version of the nexus is the same than the document's one.
Document: 4.2(1)SP1(3) ==> Nexus 1010: version 4.2(1)SP1(2)
Software
loader: version unavailable [last: loader version not available]
kickstart: version 4.2(1)SP1(2)
system: version 4.2(1)SP1(2)
kickstart image file is: bootflash:/nexus-1010-kickstart-mz.4.2.1.SP1.2.bin
kickstart compile time: 1/27/2011 14:00:00 [01/28/2011 01:14:35]
system image file is: bootflash:/nexus-1010-mz.4.2.1.SP1.2.bin
system compile time: 1/27/2011 14:00:00 [01/28/2011 04:13:25]
Hardware
cisco Nexus 1010 Chassis ("Cisco Nexus1010 Chassis")
with 14665728 kB of memory.
Processor Board ID T023D700201
We don't know which can be the problem, wheter it can be a bug in the software, or we are doing something wrong.
Thank you
