Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,
In a UCS, version 2.2(3a), we configured a VLAN to run only on Fabric A.
Now, we require to change the properties of this VLAN in order to configure it in both FI (Global mode). The problem is that we do not find where this property can be m...
Hi all,Could anyone explain me what does it mean the last two characters of the Small Business Part Numbers?For example:SF500-24-K9-NASF500-24-K9-G5SF500-24-K9-AUSF500-24-K9-KRThank you
Hi all!!I am trying to install a Nexus 1000v for Hyper-V following de documentation, and I have seen that the Installer App supposed to be used to install it is not included in the Nexus1000V5.2.1.SM1.5.2.zipI've tried to achieve it but it has been i...
HiI'd like to know if it is any command to watch the STP extensions (BPDUGuard, BPDUFilter, etc.. ) applied to specific interfaces.That is somthing like show spanning-tree summary but applied to each interface.Thanks!!!N5548-A(config-if)# sh spanning...
Hi all,We want to do a backup of a virtual-service-blade in a Nexus 1010. The document we are following is:http://www.cisco.com/en/US/docs/switches/datacenter/nexus1000/sw/4_2_1_s_p_1_3/software/configuration/guide/n1010_vsvcs_cfg_7backup.htmlWhat we...
"If you configure a port as edge port, and if it receives a BPDU, then it should error disable the port, not start working as a normal port. Can you please paste your interface config ?"Yes, in case it is BPDUGuard applied on it, on the contrary it...
Hi Vinayak,Thank you for answering, but it is not what I want to know. This information tells me what I have configured, but not how it is running in this momentFor example, I can put a port as an edge port, but if it receives a BPDU, it immediately ...
Hi AtriI am using 15.1, and yes, this command is available in 15.1. But this command is to associate some policies in the HUB to spokes depending on the characteristics of the network the spokes have.But what I want is to appy QoS to spokes, when I w...
I haven't tested it yet, but the first problem I see is that using tunnel interfaces I could apply some policies that are not possible to use in some physical interfaces (switched ports)
