UCS SEL Log - CIMC Processor CATAERR_N

[HyunJun Lee]

Hi, guys.

I checked SEL on the B200 server as follows.And the server got Hang.

Do you know why?

|BIOS| Processor #0x00 | Configuration Error | | Asserted

|CIMC| Processor CATERR_N #0x81 | Predicative Failure asserted | Asserted

|CIMC| Platform alert LED_BLADE_STATUS #0xa6 | LED color is amber | Asserted

|CIMC| Processor MCERR #0xaf | Predictive Failure asserted | Asserted

|CIMC| Processor CATERR_N #0x81 | Predicative Failure deasserted | Asserted

|CIMC| Processor CATERR_N #0x81 | Predicative Failure asserted | Asserted

|CIMC| Processor CATERR_N #0x81 | Predicative Failure deasserted | Asserted

|CIMC| Processor MCERR #0xaf | Predictive Failure deasserted | Asserted

|CIMC| Processor CATERR_N #0x81 | Predicative Failure asserted | Asserted

|CIMC| Processor MCERR #0xaf | Predictive Failure asserted | Asserted

|CIMC| Processor CATERR_N #0x81 | Predicative Failure deasserted | Asserted

|CIMC| Processor MCERR #0xaf | Predictive Failure deasserted | Asserted

[Kirk J]

Could be  a bad DIMM, CPU, firmware issue, issue with proc power management (c states), 

Really need a TAC case for that.

Would start by downloading and mounting the diag ISO from https://software.cisco.com/download/home/283853163/type/286123307/release/2.0(1a) 

Let it run through the comprehensive tests, and see if it calls out processor, DIMMs, etc

Kirk...