Unable to integrate C420M3 with UCSM2.2(1b)

[harpal singh]

Hi,

We have C420m3 rack server with intel x520-DA2 card & UCSM 2.2(1B). I have configured server port on ucsm, ports are up. But UCSM not discovering the C420m3server.

I already integrated c240 server with UCSM.

Any suggestion.

Regards

Harpal Singh

[Walter Dey]

Do have a VIC adaptor which connects to the UCS Fabric Interconnet ?
 

[harpal singh]

intel x520-DA2 card is installed in pcie slot 4.

[Walter Dey]

This will not work; the integration of C420M3 requires a VIC 1225 I/O adaptor.

see eg.

http://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-c-series-rack-servers/c420M3_specsheet.pdf

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2/b_C-Series-Integration_UCSM2-2_chapter_0110.html#reference_EF9772524CF3442EBA65813C2140EBE6

Important: Direct connect supports only the VIC firmware that supports SingleConnect. The server must have Cisco UCS VIC 1225 installed.