Hi friends,
I have a pair of Nexus 1000V version 5.2(1)SV3(2.8)
connection vcenter:
protocol: vmware-vim https
datacenter name: Cisco-vPOD
dvs version: 5.0.0
config status: Enabled
operational status: Connected
sync status: Complete
version: VMware vCenter Server 6.0.0 build-4541948
vc-uuid: 24d5ffd9-3be6-490d-9a88-7b0dc2cbc63d
ssl-cert: self-signed or not authenticated
But im unable to see VEM module
svs-domain
domain id 1
control vlan 2000
packet vlan 2000
svs mode L2
switch-guid b0c41bb5-2050-482c-bef6-78e908210124
no enable l3sec
ESXi
[root@coltocciscopod1:~] vem status
VEM modules are loaded
Switch Name Num Ports Used Ports Configured Ports MTU Uplinks
vSwitch0 5632 7 128 1500 vmnic0,vmnic1
vSwitch1 5632 4 128 1500 vmnic4
DVS Name Num Ports Used Ports Configured Ports MTU Uplinks
N1000V 1024 14 1024 1500 vmnic2
VEM Agent (vemdpa) is running
[root@coltocciscopod1:~] vemcmd show port vlans
Native VLAN Allowed
LTL VSM Port Mode VLAN State* Vlans
20 Eth1/3 T 1 FWD 1,2000
50 A 2000 FWD 2000
* VLAN State: VLAN State represents the state of allowed vlans.
Switch name: N1000V
Switch alias: DvsPortset-0
Switch uuid: 8e c2 02 50 2a f5 82 59-64 e5 d6 80 02 2d c9 66
Card domain: 1
Card slot: 1
VEM Tunnel Mode: L2 Mode
Card control VLAN: 2000
Card packet VLAN: 2000
But im unable to see the virtual ethernet module. The domain is 1, Control Vlan is 2000
port-profile type ethernet System-Uplinks
switchport mode trunk
switchport trunk allowed vlan 1,2000
no shutdown
description Uplinks to Switch
system vlan 1,2000
state enabled
vmware port-group
Thank you
