cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
737
Views
0
Helpful
2
Replies

Vtam OSA---Router7200------telco circuit----------Adapter SDLC SNAServ

wmatta.sup
Level 1
Level 1

Hi, I have this situation: Vtam OSA---Router7200------telco circuit----------Adapter SDLC SNAServerCLEO----- Does Somebody have a sample of configuration to VTAM and to SNA Server? This is a cofiguration to the router 7200. But i don´t know if is correct.

interface Serial0/1/2

description PU 2.1

mtu 4400

no ip address

encapsulation sdlc

sdlc role primary

sdlc vmac 0200.4e00.9000

sdlc address C1

sdlc xid c1 05d61000

sdlc partner 2000.4000.5000 C1

sdlc saps C1 0C 0C

sdlc dlsw C1

Help me please.

Thank you in advance.

Wmatta

2 Replies 2

mbinzer
Cisco Employee
Cisco Employee

Wimatta,

i think you can start here:

http://www.cisco.com/en/US/partner/tech/tk331/tk336/technologies_configuration_example09186a00801434cd.shtml

this is an example describing dlsw local switching between sdlc and ethernet. It has configuration examples for both pu2.0 and pu2.1.

Note:

Your example says in the description PU 2.1 but the configuration example you provided is for PU 2.0.

thanks...

Matthias

Hi, Mathias.

I made this configuration PU 2.0 in my router 7200. I used this link. But I need a sample of configuration to VTAM and to SNA server. I think that configuration is corerct. If somebody have a sample, please help me.

Sample PU 2.0:

Interface Serial0/1/2

description PU 2.0

mtu 4400

no ip address

encapsulation sdlc

sdlc role prim-xid-poll

sdlc vmac 0200.4e00.9000

sdlc address C1

sdlc partner 2000.4000.5000 C1

sdlc saps C1 0C 0C

sdlc dlsw C1

Thanks..

Review Cisco Networking for a $25 gift card