11-19-2019 11:25 PM - edited 11-21-2019 10:35 PM
Goal:
Expose multiple machines to public IPs via RV340 by static NAT of public IPs to private IPs.
Current (not working) setup
Internet provider side:
MAC address | Public IP address |
00:0C:26:B6:65:D8 | 146.10.23.23 |
00:0C:26:B6:65:D8 | 146.10.123.123 |
00:0C:26:B6:65:D8 | 146.10.223.223 |
00:0C:26:B6:65:D8 | 146.10.323.323 |
Note: all static IPs are mapped to the same WAN1 MAC address of the router.
RV340 has four WAN port (2xUTP; 2xUSB), however my internet provider connects only one cable to WAN1(UTP) and provides me with 5 random static IP addresses.
Static NAT GUI setup with random public IPs (can't be in a range)
Private IP range begin | Public IP range begin | Range Length | Service | Interface |
192.168.1.10 | 146.10.23.23 | 1 | All trafic | WAN1 |
192.168.1.20 | 146.10.123.123 | 1 | All trafic | WAN1 |
192.168.1.30 | 146.10.223.223 | 1 | All trafic | WAN1 |
192.168.1.40 | 146.10.323.323 | 1 | All trafic | WAN1 |
Only the IP used in the WAN settings (GUI) works and the rest of them are useless regardless of the static NAT settings.
Can someone provide me with guidance on a way (probably via SSH access to the router) to setup different virtual MAC addresses on a single WAN interface if that possible at all on the router? I guess this will enable all public IPs to work against the static NAT properly.
I am open for any other suggestion which reaches the goal above.
Thank you
11-20-2019 12:13 AM
Hi,
Really, I didn't find any option but here is the admin guide: http://content.etilize.com/User-Manual/1039050769.pdf
11-20-2019 03:48 AM
Thank you for your replay Deepak. I already had the admin guide. It is useless for the problem in hands.
If you come up with any idea on how to approach the situation, don't hesitate to post another replay.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide