cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.

2060
Views
0
Helpful
2
Replies
drjrwolf1
Beginner

WRVS4400N Router

Just installed a new WRVS4400N router.  wireless working.  however refuses to let me log back via Ethernet cable in at http://192.168.1.1 given me 403 Forbidden, Access Denies, Management via WLAN is not allowed.  Was able to reset and noe braodcasting unsecured "cisco b" signal, but no way to get into router and set up security.  unsure what I have done.  HELP!

2 REPLIES 2
Tom Watts
Advisor

Hi James,

Disable the wireless connection. It sounds you have both wired and wireless connection simultaneous.

-Tom

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/
aostense
Beginner

Hi James,

As Tom states, disable the wireless NIC on your PC, and connect to the router (to port 1-4) with a wired LAN cable.

If http://*** doesnt work to connect to the router, try out https://***, and/or with another browser (or delete all cookies/saved passwords in your current browser).

Hope this helps,

Arne