SG350 28P SWITCH ( DHCP SERVER CONFIGURAION USING CLI)

[MOHAMMAD_ISHAQ]

NEED DHCP SERVER CONFIGURATION COMMANDS USING CLI 

Answer

[balaji.bandi]

EDIT :

These are SMB switches more focused on GUI, Limited Command level.

https://www.cisco.com/c/dam/en/us/td/docs/switches/lan/csbms/350xg/cli_guide/CLI_Tesla_SG350X_SG350XG_2_2_5.pdf

you can use below guide for DHCP :

https://www.cisco.com/c/en/us/support/docs/smb/switches/cisco-350-series-managed-switches/smb5406-configure-dynamic-host-configuration-protocol-dhcp-snooping.html

[MOHAMMAD_ISHAQ]

Thanks, Helpful.