cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.

UC500 SIP trunk configuration for Spitfire (UK)

1700
Views
0
Helpful
0
Comments

Information for Spitfire service is available on http://www.spitfire.co.uk

Tested by Terry Regan, Spitfire.

SIP Trunk main information

Name of SP Spitfire

Dial Plan Locale (Country) GB

Fields to show on the SIP Trunk tab:

Proxy Server (Primary) Y     83.218.143.23

Proxy Server (Backup) F

Registrar Server T     83.218.143.23

Outbound Proxy Server F

SIP Domain Name T

Digest Authentication (username / password) T

User Credentials F

Call Admission Control F

Company Name F

Other:

Voice Codec Type G711ulaw with Preference 1

Fax protocol  T38

DTMF RFC 2833  with RTP payload type 96

Register all DIDs N

If register all DIDs, then - all DIDs have NA

DSCP marking Signaling cs3

DSCP marking RTP ef

SIP Destination Port 5060

Attached is the configuration guide and a template you can import into CCA 2.1 or higher. Info on how to upload a template is below:
https://www.myciscocommunity.com/docs/DOC-9168