Article ID:1471
Objective
This document explains the basic setup configuration of WET200 such as the hostname, description on the WET200 ethernet bridge using configuration utility.
Applicable Devices
• WET200 Wireless-G Ethernet Bridge
Basic Setup Configuration
Step 1. Choose Setup > Basic Setup using configuration utility of the WET200 ethernet bridge.
Step 2. Enter a host name for the device in the Host Name field. Other devices within the LAN can access the ethernet bridge with this host name.
Step 3. Enter a description for the ethernet bridge in the Device Name(Description) field. The name can be up to 39 characters.
Step 4. Enter the contact information for the access point (ethernet bridge).
Step 5. Enter the location or area where the access point resides.
Step 6. Click Save to save the settings.