sg100d-08

[daniele.ferri1981]

hi,

     I would like to know the maximum input voltage that can be applied to a switch sg100d-08 in a safe and reliable way. we plan to use this device in a very harsh environment, therefore it is extremely important to know if 12V is strictly needed.

so far with a phone call I was not able to get this information.

thanks and regards,

Daniele  

[Mark Malone]

I would go with whats recommended on the data sheet below, what are you connecting it at , these are low end SMB switches they cant take much abuse in that sense , if your looking for something harder go for an industrial ISR router 800 series that are built for harsher environments

The following table lists the specifications for the Cisco SG100D-08

Ethernet Switch.

Item Specification

Model Cisco SG100D-08 Gigabit Switch with

QoS

Standards IEEE 802.3, 802.3u, 802.3ab, 802.1p,

802.3x

Ports Eight RJ-45 10/100/1000 Mbps ports

Cabling Type Category 5 Ethernet

LEDs System, Link/Act 1 through 8

Security Feature Security Slot

Dimensions

(Width by Height by Depth)

5.51" by 1.31" by 5.51"

140 by 33.35 by 140 mm

Unit Weight 15 oz. (0.425 kg)

Power DC12V/1.0A

Certification FCC