Switches - Small Business

Hello to everyone.I am looking at the mac address table of a SF220-24P switch we have at the office.It's a POE FE switch we use chiefly for our Polycom phones, with the auto voice vlan feature enabled and in use.To give a little more detail, the port...

In the IPv4 Static Routing Table below, The switch is assigning a VLAN (and associated subnet) to a subnet/route that has zero access to my management network. How do I change the Default Route to VLAN1 and the subnet associated with VLAN1? This is a...

Dear All,I have 2 switches which are SF300-24.Switch 1 is connected to Internet Router for all clients on swith1 and switch 2.The clients on switch 1 & switch 2 don’t communicate each other.Port1~Port24 on switch 1 & switch 2 are isolated ports.Gigap...

what is the diffrence between SF302-08P and SF302-08PP ?

Hi  I  tried to use VGRP between two SG500-52. but VLAN is not automaticly created on the second switch Could you help me please  The diagram of the network:Stack-SG500 gi1/1/50 <-----------------------> gi1/49 SG500VLAN 1VLAN 115 Configuration  Stac...

Dear team,we need to install 2 switches model sg300 24p with gvrp.I have followed the instructions to set this protocol but it doesn't work.I´ve tried with 2 differents firmwares.I just need create 15 vlans and  replicate in others 2 switches with th...

Hello,Does SG500 supports policy based routing (PBR)?Thanks,Aniket  

I have a really odd problem:I have an SG300 with a few VLANS and hosts plugged into them. the issue I have is:I have 2 ports set up as a LAG with a HP NAS attached to it, all other hosts except for 1 can communicate with the NASall the hosts, NAS, LA...

Just got myself a SG200-08P switch in order to POE two WAP561.POE ports 1 and 2 (g1 and g2) LEDs are amber (as opposed to green I guess ???) - see attached screen dump.Is this normal behaviour? Port stats are ok.If a non-POE device is connected to e....

Hi,I've searched through the forums and done some reading but have not been able to resolve a duplicate IP address error that I'm getting on numerous SG 300-10's.The message I'm seeing is:10-Jun-2014 11:25:57 :%IPADTBL-N-IPDUPLICATE: Duplicate IP add...

We have a Toshiba MFP that uses 1 IP for B/W, 192.168.1.25, and we create a second printer for COLOR which uses 192.169.1.25_1.We do this to allow printing BW anytime, but the user must enter a Group ID when they print in color.The printer is simply ...

Estimados,necesito soporte, tengo 3 switch SF200 10/100 smart switch, y debo configurar 30 telefonos 3905 de cisco, pero no logro dar internet desde la puerta secundaria del telefono...?