12-04-2014 02:31 AM
Hi,
Have a new DC solution with Nexus 56128 switches running LAN + Native FC.
Storage Arrays shall be connected to the Nexus switches via 8G FC
Customer has Dell blade with Qlogic SAN switches, where existing zoning is done. Today these are connected to the Storage Array.
Is it possible to connect the Qlogic switches to Nexus and disconnect the Storage from Qlogic?
Dell blade server -> Qlogic FC switch -> Nexus FC switch -> EMC VNX Storage
Thinking about interoperability issues between Nexus and Qlogic.
/Jorgen
Solved! Go to Solution.
12-16-2014 12:24 AM
Hi,
No problem with that, just bear in mind that you have to configure NPV mode (or the equivalent qlogic name...) on the qlogic switch.
Rgds,
Felipon
12-16-2014 12:24 AM
Hi,
No problem with that, just bear in mind that you have to configure NPV mode (or the equivalent qlogic name...) on the qlogic switch.
Rgds,
Felipon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide