cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

1053
Views
5
Helpful
2
Replies
Brad Jacobsen
Beginner

Device Manager on 5548

Hi,

Have a pair of new 5548UPs here running 5.2(1)N1(1a) with SPS license. My past experience with the 5Ks has been that I could access Device Manager by pointing a browser at the mgmt0 IP, and launching the installer from there. On these new switches, I get a 404 error when I try that, and if I do "feature http" I then get what looks like an empty directory listing. Is Device Manager still supported/included on this NX-OS version? I certainly hope so, as DCNM is very much overkill for this environment.

1 ACCEPTED SOLUTION

Accepted Solutions

here is the link that explains the behavior ...

http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/release/notes/Rel_5_0_3_N1_1/Nexus5000_Release_Notes_5_0_3_N1_1c.html#wp326321

Changed Software Features

The following software features have changed in this release:

Beginning with Cisco NX-OS Release 5.0(3)N1(1b), HTTP Server is not supported.

Device  Manager is no longer packaged with Cisco Nexus 5000 NX-OS releases. You  can download Fabric Manager/DCNM-SAN software (which contains Device  Manager) directly from Cisco.com. For additional information, see the  Release Notes for Cisco Fabric Manager.

View solution in original post

2 REPLIES 2
vdsudame
Cisco Employee

Support for http on nexus switches was removed a while back hence you cannot download Device Manager. So what you are seeing is expected. DCNM-SAN standalone is way to go for the current NX-OS version 5.2.1 on 5k.

Thanks,

Vinayak

here is the link that explains the behavior ...

http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/release/notes/Rel_5_0_3_N1_1/Nexus5000_Release_Notes_5_0_3_N1_1c.html#wp326321

Changed Software Features

The following software features have changed in this release:

Beginning with Cisco NX-OS Release 5.0(3)N1(1b), HTTP Server is not supported.

Device  Manager is no longer packaged with Cisco Nexus 5000 NX-OS releases. You  can download Fabric Manager/DCNM-SAN software (which contains Device  Manager) directly from Cisco.com. For additional information, see the  Release Notes for Cisco Fabric Manager.

View solution in original post

Content for Community-Ad