09-19-2012 10:26 PM
Hi,
Have a pair of new 5548UPs here running 5.2(1)N1(1a) with SPS license. My past experience with the 5Ks has been that I could access Device Manager by pointing a browser at the mgmt0 IP, and launching the installer from there. On these new switches, I get a 404 error when I try that, and if I do "feature http" I then get what looks like an empty directory listing. Is Device Manager still supported/included on this NX-OS version? I certainly hope so, as DCNM is very much overkill for this environment.
Solved! Go to Solution.
09-20-2012 07:23 AM
here is the link that explains the behavior ...
The following software features have changed in this release:
•Beginning with Cisco NX-OS Release 5.0(3)N1(1b), HTTP Server is not supported.
•Device Manager is no longer packaged with Cisco Nexus 5000 NX-OS releases. You can download Fabric Manager/DCNM-SAN software (which contains Device Manager) directly from Cisco.com. For additional information, see the Release Notes for Cisco Fabric Manager.
09-20-2012 07:06 AM
Support for http on nexus switches was removed a while back hence you cannot download Device Manager. So what you are seeing is expected. DCNM-SAN standalone is way to go for the current NX-OS version 5.2.1 on 5k.
Thanks,
Vinayak
09-20-2012 07:23 AM
here is the link that explains the behavior ...
The following software features have changed in this release:
•Beginning with Cisco NX-OS Release 5.0(3)N1(1b), HTTP Server is not supported.
•Device Manager is no longer packaged with Cisco Nexus 5000 NX-OS releases. You can download Fabric Manager/DCNM-SAN software (which contains Device Manager) directly from Cisco.com. For additional information, see the Release Notes for Cisco Fabric Manager.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide