01-19-2010 10:51 AM
Hi there,
I´m currently looking for addtl. explanations / information regarding the "show logging onboard module" command which provides an output like this:
------------------------------------------------------------------------------
INTERRUPT COUNTS INFORMATION FOR DEVICE ID 63 DEVICE: Stratosphere
------------------------------------------------------------------------------
| | | Time Stamp |In|Port
Interrupt Counter Name | Count | Thresh |MM/DD/YY HH:MM:SS|st|Rang
| | | |Id|e
------------------------------------------------------------------------------
FCP_MAC_SR2_SYNC_ACQ_EVENT |6 |0 |01/05/10 02:03:00|02|35
FCP_MAC_SR2_SYNC_LOST_EVENT |17 |0 |01/05/10 02:03:00|02|35
FCP_MAC_SR1_LR_DETECTED |1a |0 |01/05/10 02:04:50|02|35
FCP_MAC_SR2_LR_IDLE_RECEIVED |1a |0 |01/05/10 02:04:50|02|35
FCP_MAC_SR1_LR_DETECTED |18 |0 |01/05/10 21:02:32|03|48
FCP_MAC_SR2_LR_IDLE_RECEIVED |18 |0 |01/05/10 21:02:32|03|48
FCP_MAC_SR6_LOSS_OF_SIGNAL |17 |0 |01/05/10 21:02:32|03|48
FCP_MAC_SR2_SYNC_ACQ_EVENT |7 |0 |01/08/10 02:15:47|02|35
FCP_MAC_SR2_SYNC_LOST_EVENT |18 |0 |01/08/10 02:15:47|02|35
FCP_MAC_SR1_LR_DETECTED |1b |0 |01/08/10 02:17:38|02|35
FCP_MAC_SR2_LR_IDLE_RECEIVED |1b |0 |01/08/10 02:17:38|02|35
FCP_MAC_SR2_SYNC_LOST_EVENT |19 |0 |01/13/10 02:31:09|02|35
FCP_MAC_SR1_LR_DETECTED |1c |0 |01/13/10 02:33:00|02|35
FCP_MAC_SR1_NOS_DETECTED |4 |0 |01/13/10 02:33:00|02|35
FCP_MAC_SR2_LR_IDLE_RECEIVED |1c |0 |01/13/10 02:33:00|02|35
FCP_MAC_SR2_SYNC_LOST_EVENT |1a |0 |01/15/10 04:01:43|02|35
FCP_MAC_SR1_LR_DETECTED |1d |0 |01/15/10 04:03:23|02|35
FCP_MAC_SR2_LR_IDLE_RECEIVED |1d |0 |01/15/10 04:03:23|02|35
Can anyone provide me some more information what each line is trying to say me and what might be a possible reason / cause for this?
Thanks,
Markus
02-01-2010 11:01 PM
These interupts are for fc lower layer, does not necessary mean there is an error.
03-03-2010 09:17 AM
As explained by Galen, these are FC primitive sequences which are exchanged when link comes up or goes down. Here is more information.
Primitive Sequence - NOS
Not Operational Sequence
Transmitted by the Port to indicate that Link Failure had been detected
Loss of Sync
Loss of signal
Port is Offline
Primitive Sequence - OLS
Offline Sequence
Transmitted by Port to indicate that it is: Initiating the Link Initialization Protocol
Receiving NOS
Entering the Offline State
Primitive Sequence LR
Link Reset Sequence
Transmitted by Port to Indicate that it is: Initiating the Link Reset Protocol
To Recover from a Link Timeout
Primitive Sequence LRR
Link Reset Response Sequence
Transmitted by Port to indicate that: Link Reset is being received
03-03-2010 11:32 PM
Thanks for this !
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide