cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1354
Views
5
Helpful
2
Replies

FC/FCoE from N5k to UCS/FI

SOcchiogrosso
Level 4
Level 4

I'm working on a new Data Center design, which very closely matches the hardware in the following document:

http://www.cisco.com/en/US/products/ps9670/products_configuration_example09186a0080c13e92.shtml

I'll have SANs directly attached to the N5k's, with UCS/FI where we are planning to utilize FCoE downstream to the UCS/FI environment.

Now, what I am curious about, is why in the above document (Which was updated in June 2013) there is a seperate FCoE port channel and another ethernet vPC. I am curious behind the reasoning behind this. Is there a limitation with FCoE over vPC links or is just a matter of keeping the traffic from fabric A away from fabic B?

Also I am assuming the document has an FCoE port-channel as opposed to a san-port-channel is for the additional throughput of 10Gb FCoE as opposed to the 8Gb FC links.

I see the disclaimer note about the 2x seperate links and the FI operating in NPIV mode from the FC perspective that just isn't not helping me.

--

CCNP, CCIP, CCDP, CCNA: Security/Wireless
Blog: http://ccie-or-null.net/       

-- CCNP, CCIP, CCDP, CCNA: Security/Wireless Blog: http://ccie-or-null.net/
2 Replies 2

padramas
Cisco Employee
Cisco Employee

Hello Stephen,

One of the reason on why FCoE over vPC ( between UCS and N5K ) is not supported is that UCS currently allows all VSANs on all uplinks and cannot be pruned.

HTH

Padma

Makes sense, I was thinking that was the case. Thank you for the verification.

Sent from Cisco Technical Support iPad App

-- CCNP, CCIP, CCDP, CCNA: Security/Wireless Blog: http://ccie-or-null.net/

Review Cisco Networking for a $25 gift card