Is it normal to have "Not avaiable" under connected interface for "show fcns database detail" on a native FC target device?
port-wwn (vendor) :10:01:d0:49:ea:52:9a:f0
node-wwn :10:00:d0:39:ea:52:8a:f0
class :3
node-ip-addr :0.0.0.0
ipa :ff ff ff ff ff ff ff ff
fc4-types:fc4_features :scsi-fcp:target fc-av
port-type :N
port-ip-addr :0.0.0.0
fabric-port-wwn :10:01:24:1d:2f:f8:9d:90
hard-addr :0x000000
permanent-port-wwn (vendor) :40:0d:07:71:70:b7:7f:7d (Storage)
connected interface :Not Available
switch name (IP address) :NEXUS9k (a.b.c.d)
At least I see other interfaces that are running FCoE to show information of the interface
