09-21-2017 09:03 AM - edited 03-01-2019 06:15 AM
Dear all,
In order to setup an architecture, I am trying to configure a LAB with 2 MDS switches 9148 and a FibreChannel 8 tester.
That works perfectly if I use only 1 switch (alone 192.168.1.87). My Tester is connected between port fc1/1 and fc1/2.
I can monitor the traffic on port fc1/3. Everything is fine.
But I have trouble to connect the both MDS switches together.
The goal would be to allow the traffic between the MDS (192.168.1.87) port fc1/1 and the MDS (192.168.1.88) port fc1/2 using a trunk on fc1/15 (for both switches)
The traffic is not going through.
Please find bellow the both configuration. I'm sure it's just a small mistake on the configuration
MDS 192.168.1.87
!Command: show running-config !Time: Thu Sep 21 17:52:13 2017 version 6.2(15) power redundancy-mode redundant feature npiv role name default-role description This is a system defined role and applies to all users. rule 5 permit show feature environment rule 4 permit show feature hardware rule 3 permit show feature module rule 2 permit show feature snmp rule 1 permit show feature system username admin password 5 $1$DkUa35Ey$3qxuSy1ei3pKzkVsTSC7n. role network-admin no password strength-check ip domain-lookup ip host 192.168.1.87 192.168.1.87 aaa group server radius radius snmp-server user admin network-admin auth md5 0x132b8a08d2d0f6fe3ec160ea631a83d9 priv 0x132b8a08d2d0f6fe3ec160ea631a8 3d9 localizedkey rmon event 1 log trap public description FATAL(1) owner PMON@FATAL rmon event 2 log trap public description CRITICAL(2) owner PMON@CRITICAL rmon event 3 log trap public description ERROR(3) owner PMON@ERROR rmon event 4 log trap public description WARNING(4) owner PMON@WARNING rmon event 5 log trap public description INFORMATION(5) owner PMON@INFO vsan database vsan 55 name "LABVSAN" fcdomain fcid database vsan 1 wwn 10:00:00:00:00:01:00:01 fcid 0xd50000 dynamic vsan 1 wwn 10:00:00:00:00:02:00:01 fcid 0xd50100 dynamic vsan 1 wwn 20:02:54:7f:ee:c6:77:18 fcid 0xd50200 area dynamic vsan 1 wwn 20:01:54:7f:ee:c6:77:18 fcid 0xd50300 area dynamic vsan 55 wwn 10:00:00:00:00:01:00:01 fcid 0x6a0000 dynamic vsan 55 wwn 10:00:00:00:00:02:00:01 fcid 0x6a0100 dynamic interface mgmt0 ip address 192.168.1.87 255.255.255.0 vsan database vsan 55 interface fc1/1 vsan 55 interface fc1/2 vsan 55 interface fc1/3 vsan 55 interface fc1/4 vsan 55 interface fc1/15 line console line vty boot kickstart bootflash:/m9100-s3ek9-kickstart-mz.6.2.15.bin boot system bootflash:/m9100-s3ek9-mz.6.2.15.bin interface fc1/1 switchport mode F interface fc1/2 switchport mode F interface fc1/3 switchport mode SD interface fc1/4 switchport mode SD interface fc1/5 interface fc1/6 interface fc1/7 interface fc1/8 interface fc1/9 interface fc1/10 interface fc1/11 interface fc1/12 interface fc1/13 interface fc1/14 interface fc1/15 switchport mode E interface fc1/16 interface fc1/17 interface fc1/18 interface fc1/19 interface fc1/20 interface fc1/21 interface fc1/22 interface fc1/23 interface fc1/24 interface fc1/25 interface fc1/26 interface fc1/27 interface fc1/28 interface fc1/29 interface fc1/30 interface fc1/31 interface fc1/32 interface fc1/33 interface fc1/34 interface fc1/35 interface fc1/36 interface fc1/37 interface fc1/38 interface fc1/39 interface fc1/40 interface fc1/41 interface fc1/42 interface fc1/43 interface fc1/44 interface fc1/45 interface fc1/46 interface fc1/47 interface fc1/48 !Active Zone Database Section for vsan 55 zone name LAB vsan 55 member pwwn 10:00:00:00:00:01:00:01 member pwwn 10:00:00:00:00:02:00:01 zoneset name zoneset_vsan55 vsan 55 member LAB zoneset activate name zoneset_vsan55 vsan 55 do clear zone database vsan 55 !Full Zone Database Section for vsan 55 fcalias name LABALIAS vsan 55 member pwwn 10:00:00:00:00:01:00:01 fcalias name LABALIAS2 vsan 55 member pwwn 10:00:00:00:00:02:00:01 zone name LAB vsan 55 member pwwn 10:00:00:00:00:01:00:01 member pwwn 10:00:00:00:00:02:00:01 member fwwn 20:0f:54:7f:ee:a7:c8:e0 member fwwn 20:0f:54:7f:ee:c6:77:18 member fcalias LABALIAS member fcalias LABALIAS2 zoneset name zoneset_vsan55 vsan 55 member LAB interface fc1/1 port-license acquire no shutdown interface fc1/2 port-license acquire no shutdown interface fc1/3 port-license acquire no shutdown interface fc1/4 port-license acquire no shutdown interface fc1/5 port-license acquire interface fc1/6 port-license acquire interface fc1/7 port-license acquire interface fc1/8 port-license acquire interface fc1/9 port-license acquire interface fc1/10 port-license acquire interface fc1/11 port-license acquire interface fc1/12 port-license acquire interface fc1/13 switchport trunk allowed vsan 55 port-license acquire interface fc1/14 port-license acquire interface fc1/15 switchport trunk allowed vsan 55 port-license acquire no shutdown interface fc1/16 port-license acquire interface fc1/17 interface fc1/18 interface fc1/19 interface fc1/20 interface fc1/21 interface fc1/22 interface fc1/23 interface fc1/24 interface fc1/25 interface fc1/26 interface fc1/27 interface fc1/28 interface fc1/29 interface fc1/30 interface fc1/31 interface fc1/32 interface fc1/33 interface fc1/34 interface fc1/35 interface fc1/36 interface fc1/37 interface fc1/38 interface fc1/39 interface fc1/40 interface fc1/41 interface fc1/42 interface fc1/43 interface fc1/44 interface fc1/45 interface fc1/46 interface fc1/47 interface fc1/48 ip default-gateway 192.168.1.1 span session 1 destination interface fc1/3 source interface fc1/1 rx
MDS 192.168.1.88
!Command: show running-config !Time: Thu Sep 21 15:22:40 2017 version 6.2(15) power redundancy-mode redundant feature npiv role name default-role description This is a system defined role and applies to all users. rule 5 permit show feature environment rule 4 permit show feature hardware rule 3 permit show feature module rule 2 permit show feature snmp rule 1 permit show feature system username admin password 5 $1$i.olFCUt$Drx3XjKZ5kqhBpckYDmkp1 role network-admin ip domain-lookup ip host 192.168.1.88 192.168.1.88 aaa group server radius radius snmp-server user admin network-admin auth md5 0x76942a05ad356714662f3fb384f4d59d priv 0x76942a05ad356714662f3fb384f4d 59d localizedkey rmon event 1 log trap public description FATAL(1) owner PMON@FATAL rmon event 2 log trap public description CRITICAL(2) owner PMON@CRITICAL rmon event 3 log trap public description ERROR(3) owner PMON@ERROR rmon event 4 log trap public description WARNING(4) owner PMON@WARNING rmon event 5 log trap public description INFORMATION(5) owner PMON@INFO vsan database vsan 55 name "LABVSAN" fcdomain fcid database vsan 55 wwn 10:00:00:00:00:01:00:01 fcid 0x070000 dynamic interface mgmt0 ip address 192.168.1.88 255.255.255.0 vsan database vsan 55 interface fc1/1 vsan 55 interface fc1/15 line console line vty boot kickstart bootflash:/m9100-s3ek9-kickstart-mz.6.2.15.bin boot system bootflash:/m9100-s3ek9-mz.6.2.15.bin interface fc1/1 switchport mode F interface fc1/2 switchport mode F interface fc1/3 switchport mode SD interface fc1/4 switchport mode SD interface fc1/5 interface fc1/6 interface fc1/7 interface fc1/8 interface fc1/9 interface fc1/10 interface fc1/11 interface fc1/12 interface fc1/13 interface fc1/14 interface fc1/15 interface fc1/16 interface fc1/17 interface fc1/18 interface fc1/19 interface fc1/20 interface fc1/21 interface fc1/22 interface fc1/23 interface fc1/24 interface fc1/25 interface fc1/26 interface fc1/27 interface fc1/28 interface fc1/29 interface fc1/30 interface fc1/31 interface fc1/32 interface fc1/33 interface fc1/34 interface fc1/35 interface fc1/36 interface fc1/37 interface fc1/38 interface fc1/39 interface fc1/40 interface fc1/41 interface fc1/42 interface fc1/43 interface fc1/44 interface fc1/45 interface fc1/46 interface fc1/47 interface fc1/48 !Active Zone Database Section for vsan 55 zone name LAB vsan 55 member pwwn 10:00:00:00:00:01:00:01 zoneset name zoneset_vsan55 vsan 55 member LAB zoneset activate name zoneset_vsan55 vsan 55 do clear zone database vsan 55 !Full Zone Database Section for vsan 55 fcalias name LABALIAS vsan 55 member pwwn 10:00:00:00:00:01:00:01 fcalias name LABALIAS2 vsan 55 member pwwn 10:00:00:00:00:02:00:01 zone name LAB vsan 55 member pwwn 10:00:00:00:00:01:00:01 member pwwn 10:00:00:00:00:02:00:01 member fcid 0x6a0100 member fcid 0x070000 member fcalias LABALIAS member fcalias LABALIAS2 zoneset name zoneset_vsan55 vsan 55 member LAB interface fc1/1 port-license acquire no shutdown interface fc1/2 port-license acquire no shutdown interface fc1/3 port-license acquire interface fc1/4 port-license acquire interface fc1/5 port-license acquire interface fc1/6 port-license acquire interface fc1/7 port-license acquire interface fc1/8 port-license acquire interface fc1/9 port-license acquire interface fc1/10 port-license acquire interface fc1/11 port-license acquire interface fc1/12 port-license acquire interface fc1/13 no switchport trunk allowed vsan all port-license acquire interface fc1/14 port-license acquire interface fc1/15 switchport trunk allowed vsan 55 port-license acquire no shutdown interface fc1/16 port-license acquire interface fc1/17 interface fc1/18 interface fc1/19 interface fc1/20 interface fc1/21 interface fc1/22 interface fc1/23 interface fc1/24 interface fc1/25 interface fc1/26 interface fc1/27 interface fc1/28 interface fc1/29 interface fc1/30 interface fc1/31 interface fc1/32 interface fc1/33 interface fc1/34 interface fc1/35 interface fc1/36 interface fc1/37 interface fc1/38 interface fc1/39 interface fc1/40 interface fc1/41 interface fc1/42 interface fc1/43 interface fc1/44 interface fc1/45 interface fc1/46 interface fc1/47 interface fc1/48 ip default-gateway 192.168.1.1 switch#
On MDS 192.168.1.88 everything looks fine and UP
switch(config-zone)# do sh int brie ------------------------------------------------------------------------------- Interface Vsan Admin Admin Status SFP Oper Oper Port Mode Trunk Mode Speed Channel Mode (Gbps) ------------------------------------------------------------------------------- fc1/1 55 F on up swl F 8 -- fc1/2 1 F on notConnected swl -- -- -- fc1/3 1 SD -- down swl -- -- -- fc1/4 1 SD -- down swl -- -- -- fc1/5 1 auto on down swl -- -- -- fc1/6 1 auto on down swl -- -- -- fc1/7 1 auto on down swl -- -- -- fc1/8 1 auto on down swl -- -- -- fc1/9 1 auto on down swl -- -- -- fc1/10 1 auto on down swl -- -- -- fc1/11 1 auto on down swl -- -- -- fc1/12 1 auto on down swl -- -- -- fc1/13 1 auto on down swl -- -- -- fc1/14 1 auto on down swl -- -- -- fc1/15 55 E on trunking swl TE 8 -- fc1/16 1 auto on down swl -- -- -- fc1/17 1 auto on sfpAbsent -- -- -- -- fc1/18 1 auto on sfpAbsent -- -- -- -- fc1/19 1 auto on sfpAbsent -- -- -- -- fc1/20 1 auto on sfpAbsent -- -- -- -- fc1/21 1 auto on sfpAbsent -- -- -- -- fc1/22 1 auto on sfpAbsent -- -- -- -- fc1/23 1 auto on sfpAbsent -- -- -- -- fc1/24 1 auto on sfpAbsent -- -- -- -- fc1/25 1 auto on sfpAbsent -- -- -- -- fc1/26 1 auto on sfpAbsent -- -- -- -- fc1/27 1 auto on sfpAbsent -- -- -- -- fc1/28 1 auto on sfpAbsent -- -- -- -- fc1/29 1 auto on sfpAbsent -- -- -- -- fc1/30 1 auto on sfpAbsent -- -- -- -- fc1/31 1 auto on sfpAbsent -- -- -- -- fc1/32 1 auto on sfpAbsent -- -- -- -- fc1/33 1 auto on sfpAbsent -- -- -- -- fc1/34 1 auto on sfpAbsent -- -- -- -- fc1/35 1 auto on sfpAbsent -- -- -- -- fc1/36 1 auto on sfpAbsent -- -- -- -- fc1/37 1 auto on sfpAbsent -- -- -- -- fc1/38 1 auto on sfpAbsent -- -- -- -- fc1/39 1 auto on sfpAbsent -- -- -- -- fc1/40 1 auto on sfpAbsent -- -- -- -- fc1/41 1 auto on sfpAbsent -- -- -- -- fc1/42 1 auto on sfpAbsent -- -- -- -- fc1/43 1 auto on sfpAbsent -- -- -- -- fc1/44 1 auto on sfpAbsent -- -- -- -- fc1/45 1 auto on sfpAbsent -- -- -- -- fc1/46 1 auto on sfpAbsent -- -- -- -- fc1/47 1 auto on sfpAbsent -- -- -- -- fc1/48 1 auto on sfpAbsent -- -- -- -- ------------------------------------------------------------------------------- Interface Status Speed (Gbps) ------------------------------------------------------------------------------- sup-fc0 up 1
Any idea of the root cause ?
Thanks per advance for your reply.
Best regards
Arnaud
Solved! Go to Solution.
09-26-2017 01:51 AM
The trunk interfaces don't need to be zoned !
Please delete all the zone's and zoneset on each switch and then start from scratch.
The ISL should be up and working !
Then connect your end device and do a
show flogi database vsan 55 on each switch
or
show fcns database vsan 55 on one switch
On one switch you do !!!!!!
configure the zone(s)
a zone should have 2 members (one initiator, one target)
the zone members should be based on pwwn, NOT fcid, or interface
then create a zoneset and add the zones
This configuration is automatically pushed over the ISL link to the other switch
then activate the zoneset
09-22-2017 11:49 AM
Hi Arnaud
On the second switch, I don't see
interface fc1/15 switchport mode E
Can you please post the output of this commands, for both switches
- show interface brief
- show interface fc 1 / 15
- sho vsan database membership
- show zoneset active .. vsan 55
I would advise you to use device alias, not fc-alias.
09-25-2017 01:20 AM - edited 09-25-2017 01:23 AM
Dear Walter,
Thanks for your reply.
Now both port fc1/15 are in switchport mode E, but the issue persists.
To avoid any confusion: my traffic gen is connected between sw192.168.1.87 fc1/2 and sw192.168.1.88 fc1/1
Please find bellow the results asked:
Hope that will help you.
Thanks per advance
Arnaud
192.168.1.87
switch# show interface brief ------------------------------------------------------------------------------- Interface Vsan Admin Admin Status SFP Oper Oper Port Mode Trunk Mode Speed Channel Mode (Gbps) ------------------------------------------------------------------------------- fc1/1 55 F on notConnected swl -- -- -- fc1/2 55 F on up swl F 8 -- fc1/3 55 SD -- up swl SD 8 -- fc1/4 55 SD -- up swl SD 8 -- fc1/5 1 auto on down swl -- -- -- fc1/6 1 auto on down swl -- -- -- fc1/7 1 auto on down swl -- -- -- fc1/8 1 auto on down swl -- -- -- fc1/9 1 auto on down swl -- -- -- fc1/10 1 auto on down swl -- -- -- fc1/11 1 auto on down swl -- -- -- fc1/12 1 auto on down swl -- -- -- fc1/13 1 auto on down swl -- -- -- fc1/14 1 auto on down swl -- -- -- fc1/15 55 E on trunking swl TE 8 -- fc1/16 1 auto on down swl -- -- -- fc1/17 1 auto on sfpAbsent -- -- -- -- fc1/18 1 auto on sfpAbsent -- -- -- -- fc1/19 1 auto on sfpAbsent -- -- -- -- fc1/20 1 auto on sfpAbsent -- -- -- -- fc1/21 1 auto on sfpAbsent -- -- -- -- fc1/22 1 auto on sfpAbsent -- -- -- -- fc1/23 1 auto on sfpAbsent -- -- -- -- fc1/24 1 auto on sfpAbsent -- -- -- -- fc1/25 1 auto on sfpAbsent -- -- -- -- fc1/26 1 auto on sfpAbsent -- -- -- -- fc1/27 1 auto on sfpAbsent -- -- -- -- fc1/28 1 auto on sfpAbsent -- -- -- -- fc1/29 1 auto on sfpAbsent -- -- -- -- fc1/30 1 auto on sfpAbsent -- -- -- -- fc1/31 1 auto on sfpAbsent -- -- -- -- fc1/32 1 auto on sfpAbsent -- -- -- -- fc1/33 1 auto on sfpAbsent -- -- -- -- fc1/34 1 auto on sfpAbsent -- -- -- -- fc1/35 1 auto on sfpAbsent -- -- -- -- fc1/36 1 auto on sfpAbsent -- -- -- -- fc1/37 1 auto on sfpAbsent -- -- -- -- fc1/38 1 auto on sfpAbsent -- -- -- -- fc1/39 1 auto on sfpAbsent -- -- -- -- fc1/40 1 auto on sfpAbsent -- -- -- -- fc1/41 1 auto on sfpAbsent -- -- -- -- fc1/42 1 auto on sfpAbsent -- -- -- -- fc1/43 1 auto on sfpAbsent -- -- -- -- fc1/44 1 auto on sfpAbsent -- -- -- -- fc1/45 1 auto on sfpAbsent -- -- -- -- fc1/46 1 auto on sfpAbsent -- -- -- -- fc1/47 1 auto on sfpAbsent -- -- -- -- fc1/48 1 auto on sfpAbsent -- -- -- -- ------------------------------------------------------------------------------- Interface Status Speed (Gbps) ------------------------------------------------------------------------------- sup-fc0 up 1 ------------------------------------------------------------------------------- Interface Status IP Address Speed MTU ------------------------------------------------------------------------------- mgmt0 up 192.168.1.87/24 100 Mbps 1500 switch# show interface fc 1 / 15 fc1/15 is trunking (Not all VSANs UP on the trunk) Hardware is Fibre Channel, SFP is short wave laser w/o OFC (SN) Port WWN is 20:0f:54:7f:ee:c6:77:18 Peer port WWN is 20:0f:54:7f:ee:a7:c8:e0 Admin port mode is E, trunk mode is on snmp link state traps are enabled Port mode is TE Port vsan is 55 Speed is 8 Gbps Rate mode is dedicated Transmit B2B Credit is 32 Receive B2B Credit is 32 B2B State Change Number is 14 Receive data field Size is 2112 Beacon is turned off admin fec state is down oper fec state is down Trunk vsans (admin allowed and active) (55) Trunk vsans (up) () Trunk vsans (isolated) (55) Trunk vsans (initializing) () 5 minutes input rate 0 bits/sec,0 bytes/sec, 0 frames/sec 5 minutes output rate 0 bits/sec,0 bytes/sec, 0 frames/sec 291 frames input,37104 bytes 0 discards,0 errors 0 invalid CRC/FCS,0 unknown class 0 too long,0 too short 297 frames output,26224 bytes 0 discards,0 errors 7 input OLS,7 LRR,1 NOS,11 loop inits 13 output OLS,11 LRR, 4 NOS, 7 loop inits 32 receive B2B credit remaining 32 transmit B2B credit remaining 28 low priority transmit B2B credit remaining Interface last changed at Thu Sep 21 17:35:30 2017 Last clearing of "show interface" counters :never switch# sho vsan 55 vsan 55 information name:LABVSAN state:active interoperability mode:default loadbalancing:src-id/dst-id/oxid operational state:up switch# sho vsan 55 membership vsan 55 interfaces: fc1/1 fc1/2 fc1/3 fc1/4 fc1/15 switch# show zon zone zone-attribute-group zoneset switch# show zoneset active vsan 55 zoneset name zoneset_vsan55 vsan 55 zone name LAB vsan 55 pwwn 10:00:00:00:00:01:00:01 * fcid 0x6a0100 [pwwn 10:00:00:00:00:02:00:01] switch#
192.168.1.88
switch# sho int brie ------------------------------------------------------------------------------- Interface Vsan Admin Admin Status SFP Oper Oper Port Mode Trunk Mode Speed Channel Mode (Gbps) ------------------------------------------------------------------------------- fc1/1 55 F on up swl F 8 -- fc1/2 1 F on notConnected swl -- -- -- fc1/3 1 SD -- down swl -- -- -- fc1/4 1 SD -- down swl -- -- -- fc1/5 1 auto on down swl -- -- -- fc1/6 1 auto on down swl -- -- -- fc1/7 1 auto on down swl -- -- -- fc1/8 1 auto on down swl -- -- -- fc1/9 1 auto on down swl -- -- -- fc1/10 1 auto on down swl -- -- -- fc1/11 1 auto on down swl -- -- -- fc1/12 1 auto on down swl -- -- -- fc1/13 1 auto on down swl -- -- -- fc1/14 1 auto on down swl -- -- -- fc1/15 55 E on trunking swl TE 8 -- fc1/16 1 auto on down swl -- -- -- fc1/17 1 auto on sfpAbsent -- -- -- -- fc1/18 1 auto on sfpAbsent -- -- -- -- fc1/19 1 auto on sfpAbsent -- -- -- -- fc1/20 1 auto on sfpAbsent -- -- -- -- fc1/21 1 auto on sfpAbsent -- -- -- -- fc1/22 1 auto on sfpAbsent -- -- -- -- fc1/23 1 auto on sfpAbsent -- -- -- -- fc1/24 1 auto on sfpAbsent -- -- -- -- fc1/25 1 auto on sfpAbsent -- -- -- -- fc1/26 1 auto on sfpAbsent -- -- -- -- fc1/27 1 auto on sfpAbsent -- -- -- -- fc1/28 1 auto on sfpAbsent -- -- -- -- fc1/29 1 auto on sfpAbsent -- -- -- -- fc1/30 1 auto on sfpAbsent -- -- -- -- fc1/31 1 auto on sfpAbsent -- -- -- -- fc1/32 1 auto on sfpAbsent -- -- -- -- fc1/33 1 auto on sfpAbsent -- -- -- -- fc1/34 1 auto on sfpAbsent -- -- -- -- fc1/35 1 auto on sfpAbsent -- -- -- -- fc1/36 1 auto on sfpAbsent -- -- -- -- fc1/37 1 auto on sfpAbsent -- -- -- -- fc1/38 1 auto on sfpAbsent -- -- -- -- fc1/39 1 auto on sfpAbsent -- -- -- -- fc1/40 1 auto on sfpAbsent -- -- -- -- fc1/41 1 auto on sfpAbsent -- -- -- -- fc1/42 1 auto on sfpAbsent -- -- -- -- fc1/43 1 auto on sfpAbsent -- -- -- -- fc1/44 1 auto on sfpAbsent -- -- -- -- fc1/45 1 auto on sfpAbsent -- -- -- -- fc1/46 1 auto on sfpAbsent -- -- -- -- fc1/47 1 auto on sfpAbsent -- -- -- -- fc1/48 1 auto on sfpAbsent -- -- -- -- ------------------------------------------------------------------------------- Interface Status Speed (Gbps) ------------------------------------------------------------------------------- sup-fc0 up 1 ------------------------------------------------------------------------------- Interface Status IP Address Speed MTU ------------------------------------------------------------------------------- mgmt0 up 192.168.1.88/24 100 Mbps 1500 switch# show int fc1/15 fc1/15 is trunking (Not all VSANs UP on the trunk) Hardware is Fibre Channel, SFP is short wave laser w/o OFC (SN) Port WWN is 20:0f:54:7f:ee:a7:c8:e0 Peer port WWN is 20:0f:54:7f:ee:c6:77:18 Admin port mode is E, trunk mode is on snmp link state traps are enabled Port mode is TE Port vsan is 55 Speed is 8 Gbps Rate mode is dedicated Transmit B2B Credit is 32 Receive B2B Credit is 32 B2B State Change Number is 14 Receive data field Size is 2112 Beacon is turned off admin fec state is down oper fec state is down Trunk vsans (admin allowed and active) (55) Trunk vsans (up) () Trunk vsans (isolated) (55) Trunk vsans (initializing) () 5 minutes input rate 0 bits/sec,0 bytes/sec, 0 frames/sec 5 minutes output rate 0 bits/sec,0 bytes/sec, 0 frames/sec 369 frames input,30780 bytes 0 discards,0 errors 0 invalid CRC/FCS,0 unknown class 0 too long,0 too short 391 frames output,43976 bytes 0 discards,0 errors 11 input OLS,12 LRR,1 NOS,15 loop inits 15 output OLS,10 LRR, 6 NOS, 6 loop inits 32 receive B2B credit remaining 32 transmit B2B credit remaining 28 low priority transmit B2B credit remaining Interface last changed at Thu Sep 21 15:28:47 2017 Last clearing of "show interface" counters :never switch# sho vsa 55 vsan 55 information name:LABVSAN state:active interoperability mode:default loadbalancing:src-id/dst-id/oxid operational state:up switch# sho vsa 55 mem vsan 55 interfaces: fc1/1 fc1/15 switch# show zoneset active vsan 55 zoneset name zoneset_vsan55 vsan 55 zone name LAB vsan 55 * fcid 0x070000 [pwwn 10:00:00:00:00:01:00:01] switch#
09-25-2017 12:55 PM
Hi
I see that the trunking VSAN 55 is isolated !
Can you please post the output of the following command
switch# show interface fc1/15 trunk vsan 55
Most likely its a zoning merge issue. You could also try to
Shut the ISL link between the 2 switches; then delete the whole zoning configuration on one switch; then enable the trunk again. The ISL should come up properly, and the zoneset should be pushed to the other switch.
09-26-2017 12:39 AM
Hello Walter,
You're right, VSAN55 is isolated
Same result on both switches:
switch# show interface fc1/15 trunk vsan 55 fc1/15 is trunking Vsan 55 is down (Isolation due to zone merge failure)
How can I put it UP ?
Thanks per advance
Arnaud
09-26-2017 12:49 AM
Hi Arnoud
An E port is segmented (isolation due to zone merge failure) if the following conditions are true:
•The active zone sets on the two switches differ from each other in terms of zone membership (provided there are zones at either side with identical names).
•The active zone set on both switches contain a zone with the same name but with different zone members.
Step 2 Verify the zoning information, using the following commands on each switch:
•show zone vsan vsan-id
•show zoneset vsan vsan-id
Step 3 You can use two different approaches to resolve a zone merge failure by overwriting the zoning configuration of one switch with the other switch's configuration. This can be done with either of the following commands:
•zoneset import interface interface-number vsan vsan-id
•zoneset export interface interface-number vsan vsan-id
09-26-2017 01:01 AM
Hi Walter,
Now the vsan looks UP on both switches but the traffic is still not going through :(
switch(config-if)# show interface fc1/15 trunk vsan 55 fc1/15 is trunking Vsan 55 is up (None)
09-26-2017 01:05 AM
please post for both switches
show zoneset
show zoneset active
09-26-2017 01:07 AM
As asked:
Thanks again for your help
I much appreciate
192.168.1.87
switch(config-if)# show zoneset zoneset name zoneset_vsan55 vsan 55 zone name LAB vsan 55 pwwn 10:00:00:00:00:01:00:01 pwwn 10:00:00:00:00:02:00:01 fcid 0x070000 fcid 0x6a0100 fcalias name LABALIAS vsan 55 pwwn 10:00:00:00:00:01:00:01 fcalias name LABALIAS2 vsan 55 pwwn 10:00:00:00:00:02:00:01 switch(config-if)# switch(config-if)# show zoneset active zoneset name zoneset_vsan55 vsan 55 zone name LAB vsan 55 * fcid 0x070000 [pwwn 10:00:00:00:00:01:00:01] switch(config-if)#
192.168.1.88
switch(config-if)# show zoneset zoneset name zoneset_vsan55 vsan 55 zone name LAB vsan 55 pwwn 10:00:00:00:00:01:00:01 pwwn 10:00:00:00:00:02:00:01 fcid 0x6a0100 fcid 0x070000 fcalias name LABALIAS vsan 55 pwwn 10:00:00:00:00:01:00:01 fcalias name LABALIAS2 vsan 55 pwwn 10:00:00:00:00:02:00:01 switch(config-if)# show zoneset active zoneset name zoneset_vsan55 vsan 55 zone name LAB vsan 55 * fcid 0x070000 [pwwn 10:00:00:00:00:01:00:01] switch(config-if)#
09-26-2017 01:13 AM
Your active zoneset just has one zone ! therefore no communication possible with only one device.
please do a flogi database vsan 55, on both switches; you should do at least 2 devices. then add a second zone and active the zoneset again !
09-26-2017 01:20 AM
You mean a "show flogi database vsan 55" command ?
So If I well understood, I need to create another zone behind the zoneset LAB for both switches, right ?
09-26-2017 01:25 AM
yes of course show flogi database vsan 55 !
yes, you have to add the additional zone to the zoneset; but only on one switch ! the zoneset activation will push everything over the ISL link to the other switch.
09-26-2017 01:30 AM
Ok,
I've just added these following commands on both switches:
zone name TRUNK vsan 55 member interface fc1/15 zoneset name zoneset_vsan55 vsan 55 member TRUNK
But the issue persists
show flogi database vsan55 shows the same results:
192.168.1.87
switch# show flogi database vsan 55 -------------------------------------------------------------------------------- INTERFACE VSAN FCID PORT NAME NODE NAME -------------------------------------------------------------------------------- fc1/2 55 0x6a0100 10:00:00:00:00:02:00:01 10:00:00:00:00:00:02:01 Total number of flogi = 1. switch#
192.168.1.88
switch# show flogi database vsan 55 -------------------------------------------------------------------------------- INTERFACE VSAN FCID PORT NAME NODE NAME -------------------------------------------------------------------------------- fc1/1 55 0x070000 10:00:00:00:00:01:00:01 10:00:00:00:00:00:01:01 Total number of flogi = 1. switch#
09-26-2017 01:31 AM
Sorry, I had to do on 1 switch. Let me fix that
09-26-2017 01:38 AM - edited 09-26-2017 01:42 AM
So I added the second zone only on switch 192.168.1.88.
I rebooted both of them but the issue stays
On 192.168.1.88
switch# show zoneset active zoneset name zoneset_vsan55 vsan 55 zone name LAB vsan 55 * fcid 0x070000 [pwwn 10:00:00:00:00:01:00:01] switch# show zoneset zoneset name zoneset_vsan55 vsan 55 zone name TRUNK vsan 55 interface fc1/15 swwn 20:00:54:7f:ee:a7:c8:e0 zone name LAB vsan 55 pwwn 10:00:00:00:00:01:00:01 pwwn 10:00:00:00:00:02:00:01 fcid 0x6a0100 fcid 0x070000 fcalias name LABALIAS vsan 55 pwwn 10:00:00:00:00:01:00:01 fcalias name LABALIAS2 vsan 55 pwwn 10:00:00:00:00:02:00:01 switch#
192.168.1.87
switch# show zoneset active zoneset name zoneset_vsan55 vsan 55 zone name LAB vsan 55 * fcid 0x070000 [pwwn 10:00:00:00:00:01:00:01] switch# show zoneset zoneset name zoneset_vsan55 vsan 55 zone name LAB vsan 55 pwwn 10:00:00:00:00:01:00:01 pwwn 10:00:00:00:00:02:00:01 fcid 0x070000 fcid 0x6a0100 fcalias name LABALIAS vsan 55 pwwn 10:00:00:00:00:01:00:01 fcalias name LABALIAS2 vsan 55 pwwn 10:00:00:00:00:02:00:01 switch#
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: