cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1259
Views
0
Helpful
1
Replies

NetApp FAS2020 and UCS 6120

Burak Atasal
Level 1
Level 1

Hi all,

I'm building a Cisco UCS Lab Enviroment for our company.We have couple of C-200s and a couple of B-200s.I ordered 2 MDS 9124 and 2 Nexus 5548UP for use them on the labs for providing some fc/fcoe actions to the blades..but..the switches has not arrived.The point is i have no SAN switch etc. but i have to configure storage access to the blades.

So is there any validated  design or some guides about how to directly attach a NetApp 2020 to 6120 Interconnects.and most important thing is how to configure them..

Thanks.

1 Reply 1

Prashanth Krishnappa
Cisco Employee
Cisco Employee

You will need to make sure your FIs in the B series are in switching mode

http://haroldsimon.blogspot.com/2011/01/direct-attach-storage-with-ucs.html

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: