Problem Nexus 5548 with FCoE + Bracade 200e + Storage SUN TEK

[carmijo]

Hi all, I have a problem with the integration of 2 nexus 5000 with brocade SAN Switch.

I set NPV + FCoE, but I was reading the papers for these configurations and Cisco is the question I want to create areas where I can not.

The servers are connected via Twinax with VMware directly in the UP 5048 Nexus

Someone set something like this?

greetings and thanks

Cristóbal

[Prashanth Krishnappa]

Hello Cristóbal

Having Nexus 5500 in NPV and MDS or Brocade as NPIV/Gateway switch is a fairly common set up. Can you explain what is not working.

Also, if you have the UP version of 5500, I suggest that you run NX-OS 5.1(3)N2(1) on it since there are couple issues

fixed in it associated with NPV.

[carmijo]

Hello prkrishn,

the NX-OS version I have is 5.0 (3) N1 (1c), I was reading a paper and tells me I should create zones, which does not work.

I read a configuration between nexus and Dell, which has the following steps:

I can not generate areas (the latter two steps), someone has set this before?

thanks.

Cristóbal