05-03-2017 03:56 AM
Hello,
I am trying to install the hyperflex platform.
All UCS FI configuration is successful but as soon as the ESXi configuration starts iget thuis error:
Server rack-unit-1 config failed
Reason: Unexpected prompt got through SoL for esxi
I am having a really har time find out what is going on because there is no reference anywhere about the Serial over lan interface.
How can I test it?
Is this configured on ESXi or on CIMC?
Can someone give me some advice on how to resolve this?
Thanks
Sandro
05-04-2017 08:49 AM
Greetings.
Can you confirm you are actually using the HX custom ISO, and not a generic or Cisco OEM installer?
Thanks,
Kirk...
05-04-2017 08:56 AM
Hello Kirk,
yes the esxi version is the one that comes bundled and already installed.
From what I understand up to now the SoL interface it is trying to use is something connected to the CIMC and UCS and not to the ESXi.
I have checked the serial over lan profile created on UCSM and it looks ok. I had to change the password on the esxi server.
Sandro
05-17-2017 10:48 PM
HX installed utilizes the SoL configuration in order to obtain cli access to ESXi and configure the vmk0 interface IP settings and VLAN tag. See link for config details if you need to configure it if for some reason it's missing or ESXi was reset.
https://pubs.vmware.com/vsphere-50/index.jsp#com.vmware.vsphere.install.doc_50/GUID-C65306C0-DA37-4F45-8A50-31F8D109BB1D.html
05-30-2017 11:49 PM
Hello,
Try to enable ssh and cli shell in the esxi (troubleshooting options). i had the same problem and this helped me.
12-05-2017 05:59 AM
how did you solve? i have the same problem.
i had to reset the esxi to factory, and i am stuck like this
12-11-2017 02:39 PM
I was able to resolve this by switching the cimc outband IP to use the pooled one instead of the manually assigned one I had already configured.
01-19-2018 02:47 AM
01-19-2018 03:24 AM
01-27-2018 08:16 AM
Hi all,
I had the same issue, that was solved following the procedure "Preparing HX servers for a Re-install" from Cisco HyperFlex Systems Getting Started Guide, Release 1.7
Link below:
Regards
03-05-2018 09:51 PM - edited 03-05-2018 09:52 PM
Hello Sandro,
Unexpected prompt got through SoL for esxi
You can check the VHBA placement and SOL policy , the below links may help you out for further troubleshooting.
https://kb.vmware.com/s/
https://communities.vmware.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide