Hello,
I want to create a link between the vlan's to communicate with Vlan 10
We have Qty- 2 2960X and Qty-2 2960 all are connected with each other via trunk access.
Configured vlan's on the switch
vlan10 for server
vlan 100 for voice for UC560
vlan 12 for Wireless ( Air-o-net )
vlan 1 for data
vlan 14 for cam
vlan 15 for lab1
I want all the above mention vlan to communicate with vlan 10 ( Servers ) and vise versa but vlan 100 , 12 , 1 , 14 , 15 should not communicate with each other. Which CLI should i use to do so. Is it possible without a router ( if not which route will help me to get this done with how many ports )