Switches - Small Business

Hi, I'm struggling with running a SNMP Walk against a SG500-28P stack. I wish to retrieve: CPU Utilsation Mac-address table count Port Cahnnel utilisation. Switch Stack member state  When I run the walk using 1.3.6.1 all I get is basic system info...

Trying to figure out how to get the SG300 to stop reporting port "Operational Status" in SNMP.  I'm assuming this is link status...I've uncheked it everywhere I can find.  Any help would be greatly apprecieated.  Thanks in advance!

The administration guide seems to indicate that all of the energy saving modes can be turned off on the SG300 and the SG220 series switches. I could not find an online configuration emulator to test this since what is on the website is a non-function...

I am trying to figure out if option 82 should be used or not.   We have a SG300-52 with multiple switches attached. Most of those are a single vlan.   Some have smart switches with 2-3 vlans. we use a isc-dhcp-server running on debian version jessie....

Hi all. U.P.D. Ok, problem is solved, if workaround can be seen as a fix. It's a bug unfortunately, if You check my config, You'll see that I created two ACL rules with some ACE's and bind them to Vlan's, those Vlan's is trunked to other switch thru...

This switch worked great before, but have not used x 3 years. Recently reconnected> reset to factory defaullt> accessed the switch from web based GUI> Changed the password> All fine, except the Tabs in the GUI interface have no text and clicking indi...

hi,      I would like to know the maximum input voltage that can be applied to a switch sg100d-08 in a safe and reliable way. we plan to use this device in a very harsh environment, therefore it is extremely important to know if 12V is strictly neede...

I have a SG300-28P running 1.3.7.18 which is configured in L3 mode.  This unit is running its DHCP service for my LAN hosts.I've only set up a part of my /24 LAN subnet as the DHCP scope and have statically configured a number of LAN hosts to use spe...

Hello, we have a SG-300 with latest firmware.  early morning changed from netgear gsm7300 to Cisco sg-300  as our main netowrk switch. I'm having an odd issue. On some vlans dhcp helper does not seem to work.  I probably have something set incorre...

Has anyone ever had a issue with link drops on this switch?  I read in the data sheets that this switch has an energy mode that monitors ports on active links and puts them to sleep during quite periods.  Could this possible be responsible for interm...

Hi,on an SG300-28 I'm gettng a fatal crash and reset every 24h:User Name:11-Oct-2013 17:16:30 %CDB-F-CASHINSFAIL: CDBFC_setToRequestedCdb 1: could not insert in cash***** FATAL ERROR *****Reporting Task: SNMP.Software Version: 1.3.5.58 (date  10-Oct-...

Hi All I am trying to create a redundantant network using sg300 switches,I am attaching the topology diagram,Please givesome pointers to the right direction.I need to know whether the topolgy can be acheived with out RSTP or MSTP.If mstp is need the...