05-29-2018 01:44 AM - edited 03-21-2019 11:25 AM
Hello All
I have SG300 Switch and i use it as L3 (Core switch) ,There are 12 switch is connected to it.
I have 3 Vlans
My problem is i got a message (%ARPARPTBL: ARP Table Overflow, aggregated (9)
My TCAM
IPV4 Routing in use 128
IPV4 Routing Maximum 128
What will happened if i edit the maximum entries
Does the problem will be solved or not ??
Can anyone here help me
And if i purchased 3750 or 3850 this problem will be solved or not ??
Thanks
05-29-2018 05:37 AM
Hi,
My name is Iliya Gatsev from Cisco Technical Support Team.
Please let me know what is the current firmware and boot code version ?
Iliya Gatsev
Cisco STAC Network Engineer
Together we are the human network .:|:.:|:. CISCO
05-30-2018 12:07 AM
Thank you for your reply
Firmware Version (Active Image):
1.3.5.58 |
1.3.5.06 |
05-29-2018 05:38 AM
Hi,
My name is Iliya Gatsev from Cisco Technical Support Team.
Please let me know what is the current boot code and firmware version ?
Iliya Gatsev
Cisco STAC Network Engineer
Together we are the human network .:|:.:|:. CISCO
05-29-2018 09:51 PM
Hi,
As per your query, the ARP table overflow error can be removed by increasing the TCAM Value.
Please increase the TCAM Value of the device and check if your issue is resolved or not.
Please rate this reply as useful if it resolves your issue.
05-30-2018 12:11 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide