CBS220-48T-4G-EU Smart Switch

[AvAm]

Hi,

I develop an application in C# that needs to control the CBS220-48T-4G-EU smart switch.

I would like to know if there is documentation about the smart switch's APIs that will allow me to control the smart switch in my application.

Thanks in advance.

[Flavio Miranda]

Hi @AvAm 

 On the switch documentation there is not API available. It does not support netconf, which had been used for Cisco in order to allow programability to devices like catalyst switches.

I believe you can not control this switch using a software rather than the usuall which is SSH, Telnet, SNMP. HTTP/HTTPS.

[AvAm]

Do you have a link to the SSH commands document?

[Flavio Miranda]

You can take a look on this guide below.

https://www.cisco.com/c/en/us/td/docs/switches/lan/csbss/CBS220/Adminstration-Guide/cbs-220-admin-guide.html

[AvAm]

Where can I find the CLI manual for the smart switch?

[Flavio Miranda]

https://www.cisco.com/c/en/us/td/docs/switches/lan/csbss/CBS220/CLI-Guide/b_220CLI.html