Cisco SG300 Memory Utilization Command and OID

[Saran Komgris]

I am not able to find any information about OIDs for Cisco SG300. Is there any document or reference?

Thank you.

[Mark Elsen]

 - Check out the mibs : https://software.cisco.com/download/home/286314991/type/283415684/release/2.5.7.85

 M.

[Jitendra Kumar]

try with below

ciscoMemoryPoolUsed : .1.3.6.1.4.1.9.9.48.1.1.1.5
ciscoMemoryPoolFree : .1.3.6.1.4.1.9.9.48.1.1.1.6

https://www.10-strike.com/network-monitor/pro/useful-snmp-oids.shtml

[Saran Komgris]

Those OIDs for memory don't work.

[Saran Komgris]

I have Command Line Reference for 300 Series. Does TCAM (show system tcam util) as same as Memory (show memory)?

[Jitendra Kumar]

not sure that command will work on SG300 because it's a limited cli.

https://www.cisco.com/c/en/us/support/docs/smb/switches/cisco-small-business-300-series-managed-switches/smb1723-view-ternary-content-addressable-memory-tcam-utilization-on.html

[Martin Aleksandrov]

Hi Saran,

Here is the list of all MIBs for the Sx300 series: https://software.cisco.com/download/home/283019617/type/283415684/release/1.4.10.06

Thanks