Connect Multiple SF350-48P Devices

[Korber710]

So I have an SF350-48P and I want to get another one so I can connect them and hopefully make one a master and one a slave unit. Is it possible with two SF350-48P devices or do I need and SF350X-48P to stack them? In the future I might need to connect another 48P switch as well, is this possible with one SF350X-48P (if I cannot connect the SF350-48P devices without it).

Thanks

[sunilson]

Hi @Korber710 ,

My name is Sunil Soni from Cisco Small Businsee TAC team.

Please be informed that SF350-48P is not support compatible, you need to get SF350X series switches to configure stacking.

Please refer below mentioned link for stack configuration steps.

https://www.cisco.com/c/en/us/support/docs/smb/switches/cisco-350x-series-stackable-managed-switches/smb5408-configure-stack-settings-on-an-sg350x-switch.html

you may refer Admin Guide as well..

https://www.cisco.com/c/dam/en/us/td/docs/switches/lan/csbms/350xg/admin_guide/AG_Tesla_350_550.pdf

Should you require further assistance, please do not hesitate to get a new service request opened by contacting-

Cisco Support Frontline Phone Number: 000-800-040-1521

Cisco Support Worldwide Contacts:

https://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html

Thanks,

Sunil Soni

Small Business TAC