Dear,
I am using the SG300-28 28-Port Gigabit Managed Switch. I divided 10 vlan as follows:
- Vlan1: 192.168.1.1/24
- Vlan 2: 172.168.2.1/24
- Vlan3: 172.168.3.1/24
....
- Vlan10: 172.168.10.1/24
2 days a week, the device works normally.
By Monday morning, computers in the vlan could not access the system.
I checked the Flash Memory Log Table to detect "error arp table overflow".
Please see the attached file.
Checked in TCAM Utilization, the information is as follows:
- IPv4 Routing In Use: 128
- IPv4 Routing Maximum: 128
The system has nearly 350 access devices (including laptops, phones ...) I do not know how to handle errors.
Please support
