Switches - Small Business

Hello, i have some SG500 in a stack.The Stack has Routing enabled and everything works as expected.But now i created a new VLAN10, assigned an IP-adresse and i'm not able to route into this vlan.There is no entry in the routing table. In VLAN10 are 2...

All, I am part of the CUCM TAC team and please bear with me as I do not handle much of the networking/switching aspect and really have no clue when it comes to the switches I am asking about. I've done some research and I can only find documentation ...

I'm new to this forum and not too technical. I would like to connect a non-VLAN aware router to port 1 (or other port), create VLAN 2 and VLAN 3, connecting computers to them. Can the SG200-08 be configured to allow all devices on the VLANS to get to...

My Native/Default VLAN is 1. I have 2 other VLAN 20 and 200. From those VLAN I could not access my SG300-28P switch. Default VLAN 1 IP range 10.10.0.1 - 10.10.0.255 Static VLAN 20 IP range 10.10.1.1 - 10.10.1.255 2nd Static VLAN 200 IP range 1.0.0.1 ...

Hi all, I created 2 vlans in my switch Vlan10 192.168.1.1  Ports 1 to 12  (all untagged for this vlan) Ports 13 to 24 (excluded) Vlan 20 192.168.99.1 Ports 13 to 24 (all untagged for this vlan) Ports 13 to 24 (excluded) IPv4 Interface already configu...

Hello all, Just a quick question; I have a router with ip 192.168.1.248 connected on a L2 switch, and all pc's are using this as the gateway.From the L2 goes a cable to a SF300 L3 switch, on this switch i have three Vlan's; Vlan1 ------> 192.168.1....

For switches of the SG200 series it was possible to have username and password stored in the browser. By this it was possible to use long and secure passwords and have them secured by a master password of the browser. For the SG250-26HP (2.1.0.60) th...

I need assistance with the firmware and boot code update order. I have several SG200 switches and want to ensure a smooth upgrade process. Boot code is 1.1.06 and firmware is 1.3.7.18 on all of them. What I've done so far: - Upgrade the firmware via...

What size are the screws that are used to attach the rack ears on the SG300-20 switch?

Hi all, Hi we have counter issue when plugging sfp+ transceiver module to sg500x-48 with standalone configuration we are getting 1gb instead of 6.5gb or 10gb. Is there compatibility issues transceiver module (FTLF8526P3BNL). Thanks

I did not know to update the boot software of my SRW2024 first, then update to 1.2.2b.I need to go back to the 1.0.0.86 firmware.Is it downloadable and will it work (ie work backwards and then do it properly)?  I know how to use hyperterminal and the...

I'm trying to upgrade a number of RV042s to v3.  I'm trying to update the firmware to the latest on those that already are in production and need to access them. I'm having a lot of trouble doing this. It appears that IE isn't suitable. On one situat...

Hi,  I have changed the SG300-28PP 28-Port Gigabit PoE+ Managed Switch switch password and the session got timed out. Now I cannot login the switch web console. Could you please help us with this? Thanks, Suresh Chandra 

Hello All, I want to put three switches in a stack. two of which is WS-C3750V2-48PS-E and other one is WS-C3750V2-48PS-S. Will it be compatible and if yes then is there any thing we need to take care before applying it in stack. Please help.