Issue With VLAN on Unifi AP

[gust123]

Hello everyone, 

I have a Unifi U6 Lite AP with 2 SSIDs, One SSID is my Lan and another is VLAN 20. My first SSID with LAN WAS Ok, but my another SSID with VLAN 20 Was not working (clients not getting any dhcp), My VLAN Was setuped like {Photo1.png, Photo2.png and Photo3.png}

. My AP Was plugged on a Cisco SG 200 Switch Port Trunk with PVID1 and VLAN 20 Tagged like {Photo4.png} .
   

And this Switch was conected onto my firewall who has a DHCP Server and VLAN Was configured like Photo 5

 

 

[Flavio Miranda]

Hi,

 The switch must be in trunk as you said and also the AP needs to be in trunk and It needs to give you the possibility to map SSID to Vlan. 

[gust123]

Its was a simply solution... My entry port who was reciving the ethernet was not configured to recive the vlan. Only the exit port who was connected to AP. When i configure my entry port in vlan 20 the problem was solved. xD