memory utilization for sg500

[deepakkris92]

hi,I am unable to find memory utlization for sg 500 switch?please help me for this

[deepakkris92]

i need for cli

[Jitendra Kumar]

show memory summary 

#show process memory    #show process memory history

[deepakkris92]

It does not appear for switch sg500.I have tried it

[Jitendra Kumar]

show system tcam utilization
The show system tcam utilization EXEC mode command displays the Ternary
Content Addressable Memory (TCAM) utilization.
Syntax
show system tcam utilization [unit unit-id]
Parameters
N/A
Default Usage
unit-id—Specifies the unit number. (Range: 1–8)
Command Mode
EXEC mode
Example
The following example displays TCAM utilization information.
6.21 show services tcp-udp
Use the show services tcp-udp Privileged EXEC mode command to display
information about the active TCP and UDP services.
Syntax
show services tcp-udp
switchxxxxxx# show system tcam utilization
TCAM utilization: 58%
System: 75%
Unit
----
1
2
TCAM utilization [%]
--------------------
58
57

https://www.cisco.com/c/dam/en/us/td/docs/switches/lan/csbms/Sx500/cli_guide/CLI_Nikola500_1_3_5.pdf

[deepakkris92]

Tcam utilization and memory utilization are both different.the only command
I can use is show tech support memory.that too.I really don't understand
how do I calculate.I can give you the screenshot of the memory

[deepakkris92]

Hi,
Any update on this issue?
Thx

[Jitendra Kumar]

share the output  show tech support memory.

https://quickview.cloudapps.cisco.com/quickview/bug/CSCus65844

Description (partial)

Symptom: Memory utilization information is missing from Dash-lets for Cisco MS200x , SG220,SG300,SG500 device. Conditions: Device Type: MS200x , SG220, SG300,SG500 Deploy device health to Nikola and Eastman devices and check the result from Inventory > Device Management > Network Devices ->(Select Device)->System Summary-> Memory Utilization Memory utilization information is missing from Dash-lets for Cisco MS200x , SG220,SG300,SG500 device