02-28-2024 02:11 AM - edited 02-28-2024 02:26 AM
Dear All,
Need some urgent support please.
i have cisco CBS350-24P-4G 24-Port switch and UniFi access point is connected to port23. and other ports, desktops and IP phones are connected. Access point is getting disconncted and reconnected after some times. Below are configuration on port23. but same Access point is working fine with cisco 9200 series switch. any urgent support will be highly appreciated.
switch8a5170#
switch8a5170#sh run int gi23
interface GigabitEthernet23
spanning-tree portfast
switchport mode trunk
switchport trunk native vlan 24
switchport trunk allowed vlan 14,24
no macro auto smartport
!
Switch logs:
switch8a5170#28-Feb-2024 13:12:38 %LINK-W-Down: gi23
switch8a5170#28-Feb-2024 13:12:58 %STP-W-PORTSTATUS: gi23: STP status Forwarding
28-Feb-2024 13:12:58 %LINK-I-Up: gi23
02-29-2024 12:14 AM
- Check logs on the access point ,
M.
08-07-2024 10:47 AM
I have cisco switch cbs350-24p-4G POE not working with Ap unifi U6 pro
how to fix this problem
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide