send tag & untag data in sg350-10sfp

[biju.digiana]

Dear All,

I am having both tag & untag data,which needs to send to somewhere.

But i dont know how to do it ?

which port i need to make as access & which i need to make trunk,how to mix both the data.

I am totally unable to get this.

Sorry if already answered.

[Spooster IT Services]

Hello @biju.digiana 

In simple words

tag - means port type as "trunk"

untag - port type as "access"

You can mix them very easily by setting native VLAN on the trunk port for which VLAN you want to send untagged traffic.

useful links:

Access and trunk ports explained | CCNA (geek-university.com)

802.1Q Native VLAN on Cisco IOS Switch (networklessons.com)

***Please rate all helpful posts***

[Seb Rupik]

Hi there,

you need to configure the switchport as type Trunk. This will allow you to configure one native VLAN and zero or more tagged VLANs.

Once you have configured the interface as type Trunk, go to 'VLAN Management > Port VLAN Membership' and edit the 'Trunk Mode Membership' settings.

cheers,

Seb.

[Martin Aleksandrov]

Hi  biju.digiana,

To become more familiar how to configure your VLAN inerface and VLAN to port settigs on your Sx350 switch please have a look at the following configuration guides:

https://www.cisco.com/c/en/us/support/docs/smb/switches/cisco-350-series-managed-switches/smb5827-configure-vlan-interface-settings-on-a-sx350-sg350x-or-sx550.html

https://www.cisco.com/c/en/us/support/docs/smb/switches/cisco-350-series-managed-switches/smb5411-configure-port-to-virtual-local-area-network-vlan-settings-o.html

Regards,

Martin